A STILLEN customer picked up some new Eibach Pro-Kit Lowering Springs for his 2013 Chevy Sonic Hatchback and sent in a few photos of the quick and easy install. These Eibach Pro-Kit Springs were on the car in just a couple hours and transformed the Sonic Hatchback into a fun driving little commuter.

The 2013 Chevy Sonic Hatchback sitting at stock height.

Eibach Pro-Kit Lowering Springs are available for the 2013 Chevy Sonic Hatchback and 2013 Chevy Sonic Sedan.

Pro-Kit box contains front and rear springs, front boots, bump stops and product/warranty literature.

The windshield wipers and plastic cover removed to reveal the top of the front struts.

Front tire removed to access the 2013 Chevy Sonic stock front suspension.

Stock strut and spring removed with just 4 nuts.

You can usually rent these spring compressors at your local auto parts store like Pep Boys or Auto Zone for free.

Rear tire removed to expose the 2013 Chevy Sonic stock suspension.

The rear is so easy you can actually change the rear spring without removing the tire if you wanted to. With a jackstand under the rear axle, just remove the shock bottom bolt then slowly lower the jack stand. The rear spring tilts right out.

Eibach Pro-Kit installed on the 2013 Chevy Sonic Hatchback with stock 15″ wheels.

Add some 205/45/17 tires slightly stretched on some 17x8s and you have a little commuter worth driving.

Eibach Pro-Kit Lowering Springs for the 2013 Chevy Sonic Hatchback and 2013 Chevy Sonic Sedan (part no. 38160.140) available here: http://www.stillen.com/product/lowering-kits/eibach-prokit-lowering-springs-4-springs-38160140-eib38160140-115186.html