Tags Posts tagged with "Chevy Camaro SS"

Chevy Camaro SS

0

TOP Exhaust: Magnaflow 2016-2018 Camaro SS Exhaust System

TOP Exhaust: Magnaflow 2016-2018 Camaro SS Exhaust System 2016_CHEVY_CAMARO_SS_RED

Add Growl and Bark to the Camaro SS with Magnaflow Exhaust Solutions

The 2016+ Chevrolet Camaro SS enjoys the benefit of its 6.2L LT1 engine producing 455 horsepower and 455 lb-ft torque, all in a chassis that is 200 lbs. lighter than the previous model. But, as with most factory vehicles, the ferocity is muffled and sometimes even muzzled. This TOP Exhaust: Magnaflow 2016-2018 Camaro SS Exhaust System is one of the variables that can be upgraded to unleash the fury of the V8.

TOP Exhaust: Magnaflow 2016-2018 Camaro SS Exhaust System 19265

Magnaflow’s Cat-back Competition Exhaust (p/n 19339) features an X-pipe and dual twin-tip mufflers. This stainless-steel exhaust features 4-inch piping.

MagnaFlow released three variants of its stainless-steel Camaro exhaust solution. While each system helps to reduce weight, each accomplishes a different objective. The Magnaflow Dual Axle-back Competition Exhaust for 2016-2017 Chevrolet Camaro 6.2L (19339) features 3-inch piping, retains the factory B-pipes and replaces the factory muffler sections with MagnaFlow’s proprietary design. This offers a more aggressive tone without replacing the B-piping. The Magnaflow Quad Cat-Back Competition Exhaust for 2016-2017 Chevrolet Camaro 6.2L (19265) includes an X-pipe and axle-back mufflers manufactured from 4-inch piping. This system reduces back pressure and offers an X-pipe configuration feeding into the axle-back muffler sections. This X-pipe helps to balance the exhaust pulses between the left and right cylinder banks to ensure a steady and uniform exhaust flow.  The Magnaflow Dual Axle-Back Race Exhaust for 2016-2017 Chevrolet Camaro 6.2L (19338) eliminates the mufflers altogether and replaces them with polished 3-inch piping that connect to the factory B-pipes that terminate with 4-inch polished exhaust tips.

TOP Exhaust: Magnaflow 2016-2018 Camaro SS Exhaust System 19338

The Magnaflow Axle-back Race exhaust (p/n 19338) features 3-inch mandrel bent stainless-steel piping that terminate with a pair of polished 4-inch exhaust tips.

 

MagnaFlow Exhausts enjoy a host of features and benefits, including:

  • Limited Lifetime warranty against manufacturing defects
  • Dyno tested products proven to make power
  • Performance gains in both horsepower and torque
  • Competition Series: Aggressive Exhaust Note, Reduced System Mass
  • Race Series: Most Aggressive Exhaust Tone, Muffler-less Design
  • Easy to Install, Mandrel Bent Piping
  • Stainless-steel Construction that is Built to Last

Check out Magnaflow’s full line of exhausts at stillen.com!

For more information about the TOP Exhaust: Magnaflow 2016-2018 Camaro SS Exhaust System, or to place an order today:
Chat with us (866) 250-5542
Email sales@stillen.com
or Via live chat at stillen.com

0

STILLEN Vendor Spotlight: Edelbrock is Rolling Back the Numbers

Edelbrock Logo

Who wouldn’t be excited to see lowered pricing? Well, the largest chain of discount super stores aren’t the only ones that roll back prices! Edelbrock announced a price reduction on select Edelbrock E Force Supercharger kits, making these forced induction solutions even more attainable. The discounted kits include:

1598

Part #          Application

1580            2005-09 Ford Mustang 4.6L Stage 1 w/ Tuner

15800         2005-09 Ford Mustang 4.6L Stage 1 w/0 Tuner

1534            2011-14 Chrysler LX & LC 5.7L HEMI w/ Tuner

15340          2011-14 Chrysler LX & LC 5.7L HEMI w/o Tuner

1598            2010-13 Chevy Camaro 6.2L LS3 w/ Tuner

15980         2010-13 Chevy Camaro 6.2L LS3 w/o Tuner

1597             2010-13 Chevy Camaro 6.2L L99 w/ Tuner

15970          2010-13 Chevy Camaro 6.2L L99 w/o Tuner

1586            2015 Ford Mustang 5.0L w/ Tuner

15860         2015 Ford Mustang 5.0L w/o Tuner

 

WD Price List_No Prices

Edelbrock designed its supercharger kits around Eaton TVS R2300 and TVS R2650 positive displacement blowers. Each kit is a complete system with tuning software for a turn-key boost solution. For customers desiring custom calibration by way of a stand-alone engine managment system or a third party tuning software, these kits are also available without tuning software.

41144

Its time to add boost pressure to your ride! For more information about Edelbrock E-Force Superchargers or to place your order, contact STILLEN today! You can call us at 866-250-5542, send us an email to sales@stillen.com, or you can hit us up on Live Chat at stillen.com!

0

Best Lowering Springs 2016 Chevy Camaro: Eibach

Eibach is one of the world’s leading suspension manufacturers.  Through the rigorous trials and tribulations of professional motorsports, Eibach engineers have developed performance products that can meet all forms of extreme racing conditions.   Best Lowering Springs 2016 Chevy Camaro: Eibach feature the same technology found in their race springs, providing everyday tuners the opportunity to maximize their car’s handling and suspension.

The new Chevy Camaro SS is the latest vehicle to receive a set of Eibach performance springs.  The 2016 Chevy Camaro lowering springs from Eibach are a sure-fire way to upgrade both the look and feel of your new vehicle.

Best Lowering Springs 2016 Chevy Camaro: Eibach 2016 Chevy Camaro SS with Eibach lowering springs

The 2016 Chevy Camaro SS sits low and aggressive with the Eibach Pro-Kit lowering springs.

 

2016 Chevy Camaro SS – A New Animal

The Camaro is all new and improved for its sixth generation.  The 2016 Chevy Camaro SS is a fire-breathing monster parading around in a sleek, curvy body.  Equipped with a massive 6.2L 455-HP V8, the Camaro SS shoots off the line like a rocket.  However, its updated suspension helps ensure that this muscle car is more than just a straight-line performer.  All in all, the 2016 Chevy Camaro SS feels more balanced, mature, and refined.  The Camaro has even gone through quite the diet, boasting a significant weight loss of over 200 lbs compared to the previous model.  Tipping the scales at around 3685 lbs, the new Camaro SS now has a lighter weight to match its new sleek appearance.

 

 Best Lowering Springs 2016 Chevy Camaro: Eibach

When it comes to upgrading the handling of a street-driven vehicle, the Eibach Pro Kit lowering springs are among the best of the best.  The Eibach 2016 Chevy Camaro lowering springs helps to drastically improve both the car’s performance and appearance:

Performance:  The Camaro Pro Kit lowering springs will – as the name suggests – lower your car’s center of gravity.  As a result, the kit will help reduce squat during acceleration, body roll in corners, and excessive nose-dive under braking.

Appearance:  By dropping your car’s ride height by over one inch, the 2016 Chevy Camaro lowering springs also will help lessen excessive fender-well clearance, transforming your vehicle’s overall appearance in the process.  With a lower, more aggressive stance, your Camaro SS will have the looks to match its newfound, improved performance.

Best Lowering Springs 2016 Chevy Camaro: Eibach Before Eibach 2016 Chevy Camaro lowering springs

Before: 2016 Chevy Camaro SS sitting at stock ride height.

Best Lowering Springs 2016 Chevy Camaro: Eibach Eibach 2016 Chevy Camaro lowering springs

After: Eibach 2016 Chevy Camaro lowering springs have been installed. What a difference!

 

Part Number

Eibach EIBE10230180122 Pro-Kit Lowering Springs

 

Contact Us

All in all, the 2016 Chevy Camaro lowering springs from Eibach offer your vehicle high performance handling, a more aggressive stance, and an overall superior ride quality.  They are even backed by Eibach’s “Million Mile Warranty” to boot!  With the Eibach Pro-Kit lowering springs, your 2016 Chevy Camaro SS will look and feel like a whole new machine.

If you have any questions about the Eibach 2016 Chevy Camaro lowering springs, please give our experts a call!
and help you order your new Best Lowering Springs 2016 Chevy Camaro: Eibach Springs

866-250-5542

 

0

When you hear the phrase, “exhaust system,” MagnaFlow is a name that instantly comes to mind.  At this point, the words have become practically synonymous with one another.   Over the past 30 years, MagnaFlow has earned the reputation as being one of the most preeminent exhaust manufacturers in the world.  It strives to consistently produce some of the best sounding, performing, and most durable exhaust products on the market.  As such, we here at STILLEN are proud to announce that our very own Jospeh Tu has had a hand in helping MagnaFlow continue to fulfill this mission.  MagnaFlow has recently announced an upcoming lineup 2016 Chevy Camaro exhaust systems, with Tu’s 2016 Camaro SS serving as one of the developmental vehicles that helped it all come together!

 

Let the Power Flow Through You

Sporting a loud, rumbling 6.2L V8 producing 455 HP, the new 2016 Chevy Camaro SS is already a more-than-capable machine from the factory.  The power, sound, and performance of the new Camaro is sure to put a smile on its driver’s face every time he or she takes the car out for a spin.  However, our friends over at MagnaFlow – as they always do – wanted to take things one step further (and make that smile just a little bit wider) with their new lineup of 2016 Chevy Camaro exhaust systems.  The systems come in either cat-back or axle-back variants for both the 6.2L V8 and 3.6L V6 versions of the car.  However, all of the exhaust systems are constructed out of stainless steel and feature a polished tip finish.  Each system has also been dyno tested and proven to offer performance gains in both horsepower and torque, all while offering MagnaFlow’s lifetime construction warranty.

 

Street King or Track Day Hero?

Depending on your driving needs, there is a choice of either the “Competition” or “Race” series for each 2016 Chevy Camaro exhaust system.  If you’re looking for an excellent driver for the streets, the Competition Series features an aggressive exhaust note and a reduced system mass.  On the other hand, if you’re looking to possibly track your Camaro, the Race Series offers a muffler-less design and emits – as described by MagnaFlow itself – the “most aggressive race car sound”.  Either way, you really can’t go wrong with whatever series you choose.

Magnaflow 2016 Chevy Camaro exhaust

Joseph Tu’s 2016 Chevy Camaro SS showing off its MagnaFlow exhaust at STILLEN’s recent Car-B-Que gathering!

 

The Waiting Game

We personally cannot wait for the release of these new MagnaFlow 2016 Chevy Camaro exhaust systems, which are currently available for presale.  If you wish to check out all of the upcoming 2016 Chevy Camaro exhaust products and their respective features and prices, please see this list provided by Magnaflow.  In the meantime, you can also check out this teaser clip featuring the loud rumble of the Camaro SS equipped with the new MagnaFlow exhaust.  The aggressive growl is sure to really get your blood flowing.

 

Founded in 1986, STILLEN is recognized as one of the premier tuners in the world. With Engineers and a full R&D department on location, STILLEN has long been engineering big brake kits with Brembo and AP Racing, developing superchargers with Magnuson, Edelbrock, Whipple, Vortech, and under the leadership of championship race car driver Steve Millen, trusted by thousands of enthusiasts, manufacturing STILLEN branded products and upgrades, as well as wholesale distribution and retail partners.
Contact us: info@stillen.com
© Steve Millen Sportparts