STILLEN is excited to announce the launch of the 2500/3500 Chevy Silverado and GMC Sierra TruPower by STILLEN Cold Air Intake Scoop TP403502. This product is something we’re very, very proud of.
When Chevy introduced their new Silverado 1500 intake design, they saw that they could bring air from the front of the vehicle. The air will go through the front grille, work its way up from the face of the radiator, go through a latticework type panel and then into the intake tract.
It’s a very good design that brings the freshest possible air from the front of the vehicle. However, what we notice is that the air coming up the face of the radiator is also extracting heat from the radiator. Remember, your radiator is running around 200 degrees.
Additionally, Chevy and GMC use a latticework type of material over the top of the intake scoop design. This latticework material increases turbulence, and every time you work the air, you’re introducing heat into the system.
With that being said, we looked at the design, and we saw areas of opportunity to improve the performance, reduce the intake air temperature, and increase the air volume.
What we’ve done is we’ve taken that initial concept and we’ve simply opened up the intake a little bit further to allow direct air flow. We’ve removed that lattice work material so that air comes in through the front of the grille, into the front of the scoop, and straight into your engine.
On the Chevy Silverado 1500 and the GMC Sierra 1500, one of the things that we noted was that we could also lower the bottom of that scoop to get a larger volume of air coming in through the face of the vehicle. Unfortunately, on the 2500 and 3500, we’re not able to reduce that bottom surface because there is a transmission cooler that runs along that edge.
However, we noticed that on the 2500 and 3500, their only using about half of the opening of the air scoop. The other side of the panel is completely blocked off to airflow and thus increases the restriction. What we’ve done is we’ve eliminated that restriction. We’ve completely opened up that area.
So now you have 100% airflow going into your intake scoop.
Features and benefits:
- Made in USA
- Limited lifetime warranty
- Direct cold air flow
- Reduced intake air temperatures
- Compatible with any air intake or supercharger that uses factory air intake scoop
- Textured finish for OEM fit and finish
- Very easy installation
An additional benefit to the STILLEN Intake Scoop for the +2020 Chevy Silverado and GMC Sierra 2500/3500, is that it will work with any aftermarket air intake system that utilizes the factory air intake scoop.
Since 1986 STILLEN has been engineering and manufacturing all of our products here in Costa Mesa, California. We’re extremely proud to say that this is another part in our long list of American made products.
If you have any questions about the STILLEN Intake Scoop for the Chevy Silverado and GMC Sierra 2500/3500 or any other STILLEN product, give us a call at (866) 250-5542, email: sales@stillen.com
Product Spotlight
2019+ Chevrolet Silverado 1500 Trupower by STILLEN Cold Air Intake Scoop
STILLEN is excited to announce the much anticipated launch of the 2019 Chevy Silverado Cold Air Intake Scoop. The new design allows the air to come directly into the intake system without being warmed by the radiator.
