Tags Posts tagged with "Axle Back Exhaust"

Axle Back Exhaust

With deep roots in the Nissan community, it’s only natural that STILLEN has introduced a new line of power, performance and styling products for the 2016 Nissan Maxima. Our design goal was straightforward: offer enhanced performance and add a hint of aggression to the jet-inspired styling, controls and luxurious appointments of the newly updated Maxima.

2016 Nissan Maxima with Stillen power, performance and body styling parts

STILLEN power, performance and body styling products catapult the 2016 Nissan Maxima into the Jet Set.

The Strong, Silent Type

Reviewers from Car and Driver praised the newly redesigned interior. It’s the rare review that doesn’t wax poetic about the enveloping, technology-rich driver compartment, said to be inspired by a fighter jet cockpit.

Yet the latest Maxima offers reduced cabin noise on par with leading luxury brands. Isn’t this a bit like Top Gun minus the control tower flybys?

Blue Angels

Nissan designers visited the Blue Angels for inspiration and ideas they incorporated into the redesigned 2016 Maxima. Not a bad day in the office!

Still a classic movie and all, but for Maxima pilots looking to enhance the engine note both inside and out, STILLEN offers an axle-back exhaust system to open up the afterburners a notch while offering a bump in horsepower and torque numbers.  Like a navy jet catapulting off a carrier deck, your 0-60 launch will sound a lot sweeter.

Stillen 2016 Nissan Maxima Axle-Back Performance Exhaust System

The STILLEN axle-back performance exhaust turns the 2016 Maxima afterburners up a notch.

Living on the Edge

The heavily restyled Maxima incorporates lots of angles and v-shapes (more fighter jet influence?). You could literally and figuratively describe the ’16 Maxima design as “edgy”. So our designers finished the axle-back exhaust system with 4-inch angle cut, dual wall, tapered exhaust tips. They fill the factory exhaust cutouts nicely, delivering an aggressive look that matches the enhanced exhaust note.

Getting Shredded

Everybody knows you stand clear of jet intakes…unless you want to get shredded the bad way…aka like Parmesan cheese instead of like Ahhhhhhnold.  Turbine engines and car engines both rely on free flowing air to make power (trust us on this, we looked it up on howstuffworks.com).

close up of a navy jet intake

Highway to the Danger Zone!

So the perfect pairing with the axle-back exhaust is a STILLEN cold air intake system. It offers performance gains in the 8-10 horsepower range across the entire powerband. Like the exhaust system, the ram air intake amplifies the engine note just enough to add a sporty edge to the lux interior environment.

Stillen 2016 Nissan Maxima Cold Air Intake

The cold air intake adds firepower to the 2016 Maxima Air Force.

The intake retains the factory intake tract which leads into the STILLEN polyurethane air chamber, ensuring the coldest possible air reaches the engine. A sleek, polished aluminum intake tube adds to the look and durability of the unit. It wouldn’t look out of place on an FA-18 Hornet jet fighter. A genuine K & N high flow air filter ensures the Nissan VQ35 3.5-liter V-6 engine breathes cleanly and freely.

Amping Up the Style

For Maxima owners looking to personalize their ride with some subtly aggressive exterior cues, STILLEN designers hand-crafted some great body styling pieces.

Stillen 2016 Nissan Maxima Rear Diffuser

STILLEN designers took their cues from the Maxima’s ‘Flying V’ taillights to create an edgy, muscular rear diffuser.

The STILLEN Rear Diffuser adds some low-down aggressive styling to the rear end of the Maxima. Our designers realized the stock Maxima backside looked rounded and soft compared to the angular front end. They resolved this split personality disorder with a muscular diffuser that is much more cohesive with overall vehicle styling cues. Once installed, the STILLEN diffuser “wakes” up the angular taillight design and covers up the stock exhaust cans for a more finished look. Engineered and constructed for precise fit, the rear diffuser is available either unfinished and ready for paint or painted matte black.

Stillen 2016 Nissan Maxima Roof Wing Spoiler

The STILLEN roof wing spoiler streamlines the Maxima swept roof line. Supersonic, baby!

For owners looking to enhance the Maxima roof line and improve aerodynamics, STILLEN offers a high quality polyurethane roof wing spoiler. Engineered and constructed for precise fit, the roof wing is available either unfinished and ready for paint or painted matte black.

Stillen 2016 Nissan Maxima front splitter

The STILLEN front splitter will make you shout ‘Great Balls of Fire!”

Nissan’s designers hit their target with the Maxima front end design.  A light touch was all that was needed to add a little jet fuel to the fire – we created a suitably aggressive front lip/splitter that complements the natural lines of the front bumper while adding a subtle edge.

All of the STILLEN brand 2016 Nissan Maxima body styling products are constructed of durable polyurethane using a proprietary formulation. We’re so confident in their durability that we offer a limited lifetime warranty. They’re easy to install, offer precision fit and finish and include genuine 3M auto trim tape and installation instructions.

So if your stock 2016 Maxima doesn’t quite “Take Your Breath Away”, STILLEN, has your six…teen covered.

The 2016 Maxima performance and styling products are proudly Made in the USA by expert craftsmen at the STILLEN hangars in Costa Mesa, California.

STILLEN combines best in class automotive parts and accessories with expert service to deliver personalized lifestyle solutions for automotive enthusiasts seeking power, performance and style.

Go from tame to authoritative with a touch of the gas pedal, as you accelerate in your Infiniti Q50 with STILLEN exhaust! The STILLEN Infiniti Q50 axle back exhaust kit is meticulously engineered and manufactured by our experts, so it provides you with the perfect blend of performance and power. This exhaust truly takes the already exemplary Q50 to the next level!

Infiniti Q50 Axle Back Exhaust Installed

Infiniti Q50 Axle Back Exhaust Installed

Expert Craftsmanship

Made in the USA from the highest quality materials by expert craftsmen, this Q50 exhaust is made to last. It features mandrel bent piping, free flowing performance mufflers and tips that are constructed from 304 grade stainless steel. Plus, we are so confident in the quality or our work that each exhaust comes with a manufacturer’s limited lifetime warranty.

Unmistakable Sound

Refined, yet aggressive is the most common way STILLEN exhausts are described and this Infiniti Q50 axle back exhaust is no exception. Like other STILLEN exhausts, it is mild and well-mannered under normal driving conditions, but quickly turns aggressive and authoritative when under throttle. Play the video clip below to listen and decide for yourself:

Versatile Design

Just because you want to be environmentally friendly doesn’t mean you should sacrifice performance and power! The STILLEN Infiniti Q50 rear section exhaust fits both hybrid and non-hybrid models!

Infiniti Q50 Axle Back Exhaust

Infiniti Q50 Axle Back Exhaust

Where to Find the Infiniti Q50 Axle Back Exhaust

If you’re ready to upgrade to the STILLEN Infiniti Q50 axle back exhaust, then please give our experts a call at (866) 250-5542. They will be happy to answer any questions you have about this rear section exhaust or any of the other Q50 parts we manufacturer. Additionally, if you live in the Southern California area and would like to have your aftermarket parts professionally installed, please be sure to visit our performance shop in Costa Mesa, CA. To make an appointment, simply give us a call and we will be happy to add you to our schedule!

If you want to take your ride to the next level, then the new Magnaflow 2014 Chevy Corvette C7 exhaust is the systems for you. Not only does this system feature the signature sound only a Magnaflow exhaust can bring you, but it is also dyno tested and proven to make power. Just think of the fun you can have with a little extra power and how great a new exhaust will sound on your C7!

Magnaflow 2014 Chevy Corvette C7 Exhaust

Magnaflow 2014 Chevy Corvette C7 Exhaust

Signature Sound:

This 2014 Corvette C7 axle back exhaust features Magnaflow’s signature sound and boasts a smooth deep tone that will make everyone jealous. Click the video below to hear what we’re talking about:

Magnaflow 2014 Chevy Corvette C7 Exhaust Available in Black or Stainless Steel Finishes:

Magnaflow is now offering the Corvette C7 axle back exhaust in an iconic stainless steel finish or for someone that is looking for a more aggressive look, a black over stainless steel finish. Check out the photos below!

Magnaflow 15316 Chevy Corvette Stingray Stainless Steel Axle-Back Exhaust - Quad Center Rear Exit

Magnaflow 15316
Chevy Corvette Stingray Stainless Steel Axle-Back Exhaust – Quad Center Rear Exit

Other Reasons Why We Love the Magnaflow Corvette C7 Exhaust:

  • 3″ mandrel bent tubing
  • 4.5″ polished stainless tips
  • 5″ x 8″ x11″ polished stainless mufflers
  • Quad center rear exit exhaust
  • Fits V8 6.2L C7 Corvettes
  • Lifetime warranty on stainless steel; 1 year warranty on black finish

How to Order

To order the stainless steel or black over stainless steel Magnaflow Corvette C7 exhaust, simply click the links below or call us at (866) 250-5542 and we will be happy to help you.

If you’d like to get your new exhaust professionally installed at the STILLEN Southern California performance shop, simply give us a call at (866) 250-5542 and we will be happy to get you on the schedule!

Take your 2013-2014 Sentra to the next level with a new STILLEN stainless steel axle back exhaust. Just released, this exhaust system for the Sentra is some of the finest work the STILLEN R&D has produced to date. It offers mandrel bent piping, a polished stainless steel wall tip and 304 stainless steel construction. With these high quality materials and expert manufacturing, it’s easy to see why we’re proud of it.

Like other STILLEN exhausts, this rear section exhaust for 2013-2014 Nissan Sentras boasts an aggressive tone under hard acceleration to add a little kick to your drive!

Stillen 2014 Sentra exhaust

Stillen 2013-2014 Sentra Stainless Steel Rear Section Exhaust

 

A Long Friendship: Nissan & STILLEN

With over 25 years’ experience installing and developing Nissan aftermarket parts, you can trust that the STILLEN team of experts with your Sentra. Every one of our exhaust systems are meticulously engineered and crafted by our research & development team  at our automotive campus in Costa Mesa, California. Every exhaust that we develop is tested time and time again until we got an unsurpassed level of the perfect sound and performance.

Features & Benefits of the 2013-2014 Sentra Axle Back Exhaust by STILLEN

  • 304 stainless steel mufflers & tip for added durability and a long life
  • Backed by a manufacturer’s limited lifetime warranty
  • Mandrel bent piping for a smooth flow and fuel mileage gains at cruising speeds

STILLEN 2014 Nissan Sentra ExhaustIf you’re interested in this Nissan Sentra axle back exhaust, please visit our website at STILLEN.com, or call us at 866-250-5542 and we will be happy to help you. We also offer rear section exhaust installations at our full service auto shop in Costa Mesa, California that specializes in both Nissan & Infiniti installations.

SOCIAL

29,176FansLike
11,711FollowersFollow
5,464FollowersFollow
0SubscribersSubscribe