Tags Posts tagged with "camaro ss"

camaro ss

0

TOP Exhaust: Magnaflow 2016-2018 Camaro SS Exhaust System

TOP Exhaust: Magnaflow 2016-2018 Camaro SS Exhaust System 2016_CHEVY_CAMARO_SS_RED

Add Growl and Bark to the Camaro SS with Magnaflow Exhaust Solutions

The 2016+ Chevrolet Camaro SS enjoys the benefit of its 6.2L LT1 engine producing 455 horsepower and 455 lb-ft torque, all in a chassis that is 200 lbs. lighter than the previous model. But, as with most factory vehicles, the ferocity is muffled and sometimes even muzzled. This TOP Exhaust: Magnaflow 2016-2018 Camaro SS Exhaust System is one of the variables that can be upgraded to unleash the fury of the V8.

TOP Exhaust: Magnaflow 2016-2018 Camaro SS Exhaust System 19265

Magnaflow’s Cat-back Competition Exhaust (p/n 19339) features an X-pipe and dual twin-tip mufflers. This stainless-steel exhaust features 4-inch piping.

MagnaFlow released three variants of its stainless-steel Camaro exhaust solution. While each system helps to reduce weight, each accomplishes a different objective. The Magnaflow Dual Axle-back Competition Exhaust for 2016-2017 Chevrolet Camaro 6.2L (19339) features 3-inch piping, retains the factory B-pipes and replaces the factory muffler sections with MagnaFlow’s proprietary design. This offers a more aggressive tone without replacing the B-piping. The Magnaflow Quad Cat-Back Competition Exhaust for 2016-2017 Chevrolet Camaro 6.2L (19265) includes an X-pipe and axle-back mufflers manufactured from 4-inch piping. This system reduces back pressure and offers an X-pipe configuration feeding into the axle-back muffler sections. This X-pipe helps to balance the exhaust pulses between the left and right cylinder banks to ensure a steady and uniform exhaust flow.  The Magnaflow Dual Axle-Back Race Exhaust for 2016-2017 Chevrolet Camaro 6.2L (19338) eliminates the mufflers altogether and replaces them with polished 3-inch piping that connect to the factory B-pipes that terminate with 4-inch polished exhaust tips.

TOP Exhaust: Magnaflow 2016-2018 Camaro SS Exhaust System 19338

The Magnaflow Axle-back Race exhaust (p/n 19338) features 3-inch mandrel bent stainless-steel piping that terminate with a pair of polished 4-inch exhaust tips.

 

MagnaFlow Exhausts enjoy a host of features and benefits, including:

  • Limited Lifetime warranty against manufacturing defects
  • Dyno tested products proven to make power
  • Performance gains in both horsepower and torque
  • Competition Series: Aggressive Exhaust Note, Reduced System Mass
  • Race Series: Most Aggressive Exhaust Tone, Muffler-less Design
  • Easy to Install, Mandrel Bent Piping
  • Stainless-steel Construction that is Built to Last

Check out Magnaflow’s full line of exhausts at stillen.com!

For more information about the TOP Exhaust: Magnaflow 2016-2018 Camaro SS Exhaust System, or to place an order today:
Chat with us (866) 250-5542
Email sales@stillen.com
or Via live chat at stillen.com

0

K&N  Uncovers More Horsepower from the 2016 Camaro SS 6.2L

KN Camaro Intake Clipped

 

Chevrolet’s Generation V 6.2-liter small block V8 provides the 2016 Camaro SS with immense performance and surprising efficiency. The push rod, two valve-per-cylinder LT1 V8 generates 455 horsepower. It is similar to the LS family of small-block engines but features a unique aluminum block casting and cylinder heads, oiling system and an aggressive 11.5:1 compression ratio. It also incorporates advanced technologies such as direct fuel Injection and continuously variable valve timing.

Logo

 

An entirely new intake manifold design was developed to provide a straighter path into the combustion chamber. Although GM engineers invested in the development of the LT1 there is still room for improvement. K&N developed its AirCharger air intake system (p/n) 69-4534TP  for the SS to significantly improve incoming air flow as well as reduce turbulence in the intake tube. This intake has been chassis dyno-tested to deliver an estimated 15.16 horsepower gain over stock and can be installed in 90 minutes or less with simple hand tools. In addition to more power, this air intake system improves engine sound with a more aggressive and deeper tone during acceleration.

The air intake includes a chrome capped K&N high-flow air filter within a heat shield that replaces the original airbox space. The oversized conical air filter is manufactured from multiple layers of oiled cotton filter media, which offers less resistance than traditional paper filters. Air then passes through an aerodynamically-verified polished aluminum intake tube into the engine’s throttle body. The intake tube includes fittings for the factory mass air flow sensor and crank case vent hose.

KN Camaro Intake Installed

The only maintenance is a service you can do yourself at intervals of 100,000 miles (depending upon your driving conditions) using the K&N 99-5000 recharger kit to clean and refresh your air filter in preparation for another 100,000 miles of driving. This filter is designed to last for the lifetime of your vehicle, which K&N guarantees will perform for up to 10 years or 1,000,000 miles without requiring replacement.

The K&N 69-4534TP cold air intake is designed for both the 2016 and 2017 Chevrolet Camaro SS 6.2-liter V8.

 

0

STILLEN Product Announcement: Street Legal Edelbrock E-Force Supercharger Kits

brz

50 State Street-Legal Boost by Edelbrock

The term “street legal” applies to cars that roll off the dealership’s lot or showroom floor. For the enthusiast seeking more performance, maintaining street-legal status requires the installation of government sanctioned upgrades. The state with the most stringent requirements in the nation is California, as set forth by the California Air Research Board (C.A.R.B.).

1556

Scion FR-S / Subaru BRZ / Toyota 86 Supercharger Kit

If a manufacturer wishes to sell parts that have any effect on the emissions of a vehicle, it must submit its products to C.A.R.B. for evaluation to determine whether a product alters or modifies the design or performance of the factory emissions control systems. Once the design satisfies C.A.R.B. requirements, CARB will issue that specific product and vehicle application an Executive Order (E.O.) number for an exemption from the vehicle code, indicating that the part(s) or upgrades do not affect emissions and therefore may be used for street use. This is especially important in states that require emissions, where a visual inspection will fail if the parts installed are not street legal.

1598

Camaro SS Supercharger kit (2010-13 Kit #1598 Shown)

Edelbrock has submitted numerous products to C.A.R.B. to be evaluated for a CARB EXEMPT Executive Order to allow street-legal use. Its latest E-Force Supercharger Systems for the 2016 Chevrolet Camaro SS, 2015-16 Corvette Z06, 2012-16 Jeep Wrangler and 2012-16 Scion FR-S, Subaru BRZ and Toyota GT86 have all received E.O. numbers, allowing more horsepower to be made legally.

41144

 

Part Numbers                       E.O.#              Applications

1558, 1559, 15580, 15590  D-215-92       2016 Chevrolet Camaro SS

15731, 157310, 157320      D-215-90       2015-16 Chevrolet Corvette Z06

1527, 15270                          D-215-91       2012-2016 Jeep Wrangler

1556,15560                           D-215-93       2012-2016 Scion FR-S, Subaru BRZ, Toyota GT86

1527

Jeep Wrangler Supercharger Kit

For more information about Edelbrock E-Force Supercharger solutions or to purchase an E-Force Supercharger kit for your ride, contact STILLEN at 866-250-5542, by email at sales@stillen.com or via Live Chat at stillen.com.

Founded in 1986, STILLEN is recognized as one of the premier tuners in the world. With Engineers and a full R&D department on location, STILLEN has long been engineering brake rotors & pads, developing superchargers with Magnuson, Edelbrock, Whipple, Vortech, and under the leadership of championship race car driver Steve Millen, trusted by thousands of enthusiasts, manufacturing STILLEN branded products and upgrades, as well as wholesale distribution and retail partners.
Contact us: sales@stillen.com
© Steve Millen Sportparts