Tags Posts tagged with "CARB EO"

CARB EO

0

STILLEN VQ35HR 350Z & G35 Supercharger Now Available

STILLEN 07-09 NISSAN 350Z SUPERCHARGED SATIN (4)

STILLEN is proud to announce the availability of the 2007-2008 350Z supercharger kit for the dual throttle body VQ35HR powered Nissan 350Z.

350zsupercharger_0006

This STILLEN supercharger system took over a year to develop and involves revolutionary designs to offer customers easy upgradability and installation.

STILLEN Nissan 350 HR STILLEN SUPERCHARGED (10)

With this supercharger system, power for the 350Z and G35 is boosted to 450 horsepower at the crank (or 360-375whp), and this system won’t give you a hard time when you need to smog, because these kits are CARB Exempt. Thanks to that CARB Exempt EO#, this means when smog – or inspection – rolls around, your car is 100% emissions legal. Since California is the strictest state in the union when it comes to emissions, if it passes CA standards, it probably will pass your local regulations. (Be sure to check your local laws to ensure you’re compliant anyways)

STILLEN_Black_Supercharger_Studio-1

Air to water intercooler: By redesigning the intake manifold we were able to incorporate the intercooler inside the manifold, thus allowing us to cool the air charge immediately before the air enters the engine.

STILLEN_Black_Supercharger_Studio-2

On the dual throttle body VQ35HR engines found in 2008-09 Nissan 350Z and 2008-09 Infiniti G35, power is slightly lower than the VQ37HR, due to the engine being smaller and the fact that VQ37HR has VVEL whereas the VQ35HR does not. Power output is typically around 450 horsepower to the crank (stock is 300hp to the crank), which ends up working out to around 360whp, in most cases.

Supercharged Silver 350Z on Dyno-3

Additionally, the front mounted heat exchanger does not block the airflow supplying cool air to other vital coolers such as the radiator, engine oil cooler, transmission cooler, power steering cooler or the A/C condenser.

STILLEN Nissan 350 HR STILLEN SUPERCHARGED (11)

Because water is 4 times more efficient at dissipating heat than air, we are able to utilize a more compact heat exchanger to cool the water.

Street Legal 350Z Supercharger

** Individual results will vary based on the baseline of the stock engine, type of dynamometer used, temperature, elevation, fuel and various other factors.

STILLEN Nissan 350 HR STILLEN SUPERCHARGED (1)

We put hours of testing and development into ensuring this kit performs as well on the 350Z and G35 as it does on the 370Z.

Supercharged Silver 350Z on Dyno-1

We offer this kit in 2 versions – the Tuner Kit, which does not include the tuner cable, tune file or license and assumes you’ve already got those items – and the Tuned Kit, which includes the tuner cable, a custom tune file and tuning support from STILLEN. Available in your choice of Satin, Polished and Black Powdercoated Finishes for the Supercharger and chargepipes.

Check out Yoshio testing the performance of his newly Supercharged 2008 G35 Sedan in the video below:

Check it out on a Supercharged VQ35HR 350Z in this clip:

Have questions or want to order this kit for yourself? Give us a call at 1-866-250-5542, chat live with the team at STILLEN.com or email us at sales@stillen.com – and of course, you can always stop by the shop during business hours.

0

Get the boost of performance you’ve been craving with the all new JBA Ford Mustang Headers! These smooth flowing headers open up your 2011-2014 Mustang’s exhaust for improved performance without compromising the factory emissions equipment.

JBA Cat4ward 2011-2014 Ford Mustang Headers

JBA Cat4ward 2011-2014 Ford Mustang Headers

CARB Exempted Mustang Headers

With the JBA 2011-2014 Ford Mustang 3.7L Cat4ward headers, you can rest easy knowing that they are CARB EXEMPT.

Made for Power

Enjoy maximum power gains with the JBA 2011-2014 Ford Mustang Headers! These headers feature mandrel bent tubing and you can select an optional ceramic coating for added heat protection.

Hassle Free

For your convenience, the JBA Mustang Headers feature a hassle free, bolt-on installation. Plus, they come with 3/8″ CNC laser-cut flanges, which ensure a tight seal for long term, reliable performance without leaks from warping.

3 Finishes to Choose From

Get the perfect look and durability level with three finishes to choose from – Silver, Titanium and Stainless Steel. For more information on these headers, click the links below:

Got Questions About the JBA Ford Mustang Headers? Contact Us!

As a JBA authorized dealer and nearly 30 years’ experience working with aftermarket performance parts, no one is more qualified to answer your questions about the new JBA Ford Mustang headers than the experts at STILLEN. To contact us, simply call (866) 250-5542 and we will be happy to answer any questions you have about these headers or any of the other Ford Mustang parts we offer.

0

Good for 18.5WHP / 13WTQ Power Gain – CARB EXEMPT EO# D-436-22

Just announced… STILLEN cold air intakes for Nissan and Infiniti vehicles have been granted CARB EXEMPT EO#’s through 2014! For over 20 years, STILLEN has worked with the California Air Resources Board (CARB) to develop products that are compliant with OE standards of total vehicle integration and performance while still satisfying emission control regulations. With this long history in mind, STILLEN is proud to announce the cold air intakes for the Infiniti Q50 and Q60 have been granted CARB EXEMPT Executive Order numbers. These numbers mean that the part has been shown not to alter or modify the design or performance of the factory emissions control equipment. While a typical aftermarket intake will automatically fail visual inspection, intakes with a CARB EO# will not fail a visual inspection, allowing the car to still be emissions tested as usual. We are equally proud to announce year range extensions for the 2014 370Z , Maxima and more. For a full list of vehicle applications, please see below.

STILLEN was the first company to prove that a cold air intake on the VQ37 engine could actually make power and is still recognized as the leading cold air intake with the highly sought after Generation 3 long tube cold air intakes for the 370Z, G37 and Q60.   It took 6 months of in-house R&D and testing and 56 different variations of prototype intake systems but it was all worth it and the end result was the leading cold air intake for the VQ37 equipped vehicles.

Nissan Titan Air Intake

STILLEN Air Intake for Nissan Titan CARB EXEMPT EO# D-436-22 is good for a 15WHP / 27WTQ Power Gain At The Wheels

When it came time to manufacturing air intake systems for vehicles like the Altima, Maxima, Titan, Frontier, etc. STILLEN leaned on its vast experience in manufacturing high performance parts for NISSAN/INFINITI vehicles.  On the Nissan Altima and Maxima applications STILLEN is the only manufacturer of high performance intakes that incorporates a poly-urethane ducted air intake path leading fresh air from behind the factory grille directly into the air intake filter.  Included in many of these kits is STILLEN’s unique velocity ring which increases the velocity of the air as it is drawn into the engine thus producing more power!

Note: The California Air Resources Board (CARB) is a division of the California state government and is widely recognized for having the most stringent emissions control regulations in the United States. Therefore, each of the 50 states recognizes its standards as the emissions standard for all performance parts. Each performance part that achieves CARB EXEMPT status is considered 50-state legal.

STILLEN CARB EXEMPT Cold Air Intakes (EO# D-436-21)

STILLEN CARB EXEMPT Cold Air Intake

Contact Us

For more information about the STILLEN cold air intakes, please browse our website or call (866) 250-5542 to speak with one of our experts.

Founded in 1986, STILLEN is recognized as one of the premier tuners in the world. With Engineers and a full R&D department on location, STILLEN has long been engineering big brake kits with Brembo and AP Racing, developing superchargers with Magnuson, Edelbrock, Whipple, Vortech, and under the leadership of championship race car driver Steve Millen, trusted by thousands of enthusiasts, manufacturing STILLEN branded products and upgrades, as well as wholesale distribution and retail partners.
Contact us: info@stillen.com
© Steve Millen Sportparts