Tags Posts tagged with "cat-back exhaust"

cat-back exhaust

The STILLEN® Cat-Back Exhaust System for the VR30DDTT Infiniti Q50 and Infiniti Q60 3.0t has an aggressive tone under hard acceleration, but mellow during cruising, with that unmistakable STILLEN sound. STILLEN engineers unlocked a 26WHP and 29WTQ Gain. Those numbers are nothing to sneeze at, and you’d be hard pressed not to notice an additional 29lb/ft of torque.

2017-2018 Infiniti Q60 3.0T DYNO

STILLEN went through extensive design, engineering and testing to ensure the STILLEN Infiniti Q50 and Infiniti Q60 Cat-Back Exhaust Systems would be the best available for our customers. Designed to fit beautifully into the OEM valance or as a compliment to a STILLEN® Rear Diffuser, this system looks as good as it sounds. Available with three tip options to suit your tastes – choose from Carbon Fiber, Polished or Burnt-Titanium Look Tips to give your Q’s rear end that ‘extra something’ it needed.

2017-2018 Infiniti Q60 3.0TT Stainless Steel Cat-Back Exhaust System

Years of racing and product development have taught STILLEN that relying on computer software simulations or using comparable product data is not enough to produce the best possible product for our customers. There is no substitute for physical validation especially when it comes to the Nissan’s VR30 Engine. Numerous Infiniti Q50 and Infiniti Q60 Cat-Back Systems were tested through dyno pulls and extensive data logging. STILLEN’s rigorous procedures even included testing different merge angles between pipes. The result of STILLEN’s rigorous program found a “Y-Pipe” layout similar to what is found on the Nissan GTR VR38 Engine produced the best result.

The STILLEN Cat-Back Exhaust System consist of a Y-Pipe, Mid- Pipe, and Dual Mufflers w/ Interchangeable Tips. The 2.5″ diameter Y-Pipe configuration allows for better airflow. The Y-Pipe than connects to the Mid-Pipe. The 3″ diameter Mid-Pipe than carries the exhaust gases to the rear of the vehicle where it branches back into 2.5″ diameter dual rear exit. Upon meeting the rear exhaust pipes the exhaust gases flow through the STILLEN engineered and manufactured mufflers. The 4.5″ diameter bolt-on exhaust tips enable you to adjust the tip position for a proper fit no matter what bumper or aero you choose to run at the back. Finally, the exhaust note is mild and well-mannered under normal driving conditions, but quickly turns aggressive and authoritative when under throttle. The overall size of the STILLEN Cat Back Exhaust System will differ to the Infiniti Q50 and Infiniti Q60 respectively.

STILLEN’s use of mandrel bent 304 Stainless Steel backed by a limited lifetime warranty ensures your cat-back exhaust will last. The VR30DDTT Infiniti Q50 and Infiniti Q60 Cat Back Exhaust is proudly engineered and manufactured in the USA at its facilities in Costa Mesa, California.


For more information or to place your order about the Infiniti Q50 and Q60 VR30DDTT Cat-Back Exhaust from STILLEN®

Chat with us 866-250-5542
Email sales@stillen.com
or Live Chat at stillen.com!


STILLEN’s 2017-2018 Infiniti Q60 3.0T Cat-Back Exhaust System!

STILLEN® released one of the most powerful cat-back exhaust system for the Infiniti Q60 3.0T. The twin turbo V6 VR30DDTT engine from Infiniti is a very exciting power plant that comes with a tremendous amount of potential and opportunity. STILLEN is excited to get to work tuning this baby GT-R platform!

To start with the development of this Cat-Back Exhaust System, STILLEN created multiple prototype systems. Ranging from true dual to X pipe to Y pipe with varying diameters of tube in each configuration. Having been in the business of developing high performance exhaust systems for more than three decades we have learned that there is no formula or cheat sheet for creating a performance exhaust system. The only way to find out what works best for an engine and vehicle configuration is to build and test.

Having developed a wide range of prototype exhaust systems our engineering team hit the dyno to see which configuration produced the best results. After all of the tests were completed, we were a little bit surprised to learn that the best exhaust system was lying in front of us the whole time. The twin turbo V6 Nissan GT-R favors a dual into single back to dual configuration and after our testing was complete we learned that the Infiniti Q60 VR30DDTT does too. This exhaust system features a 2.5” Y pipe which flows into a 3” mid-pipe. The 3” mid-pipe then carries the exhaust gases to the rear of the vehicle where it branches back into 2.5” dual rear exit.

Upon meeting the rear exhaust pipes the exhaust gases flow through the STILLEN engineered and manufactured mufflers. During our development, the STILLEN engineering team struggled to get the exhaust note “just right” with traditional off the shelf mufflers. This can be a common problem when working on a turbo engine as the turbo acts like a muffler and restricts the engines exhaust note. Our engineering team struggled to find the balance between too loud and too quiet until the decision was made to develop and manufacture our own muffler bespoke to the VR30DDTT platform. STILLEN has been manufacturing their own mufflers in house since 2002 with great success.

The end result of our teams tireless work is the most powerful cat-back exhaust for the Infiniti Q60 is available today. This system features 100% stainless steel construction, laser cut 304 stainless steel flanges, polished stainless steel mufflers and a selection of three different exhaust tips ranging from polished stainless steel, flame burnt torch series stainless steel, to polished stainless steel wrapped in dry carbon fiber.  All of this backed by STILLEN’s limited lifetime warranty.

2017-2018 Infiniti Q60 3.0TT Stainless Steel Cat-Back Exhaust System

Product Features:

  • Greatest Incremental Horsepower Gain: 26.3 HP @ 4,680 RPM
  • Greatest Incremental Torque Gain: 29.5 lb-ft @ 4,680 RPM
  • 100% Stainless Steel
  • Limited lifetime Warranty
  • American Made
  • Authoritative Tone Under Throttle
  • Most Powerful

2017-2018 Infiniti Q60 3.0T DYNO

Also Available:

2017-2018 Infiniti Q60 3.0T Exterior Styling

Exterior Styling

2017-2018 Infiniti Q60 3.0T Performance, Brakes, & Handling

Performance, Brakes, & Handling


If you have any questions about the Infiniti Q60 3.0tSTILLEN Cat-Back Exhaust Systems or any STILLEN products for the Infiniti Q60 on our website, give us a call at (866) 250-5542, email sales@stillen.com, or message us on our Live Chat!


 

All-New 2016-2018 Nissan Maxima STILLEN® Cat Back Exhaust System

STILLEN® is excited to announce the release of the STILLEN Cat Back Exhaust Part # 504398 for the 2016-2018 Nissan Maxima. The Nissan Maxima offers an exciting driving experience that can be further enhanced by the great sound and performance of a STILLEN Cat Back Exhaust.

Nissan Maxima Cat Back Exhaust

Using our extensive experience with the VQ35 DE (3.5 liter) V6, STILLEN® offers our cat back exhaust for the 8th generation Nissan Maxima A36. It will enhance your Maxima with the sound that you are looking for, plus, deliver an increase in performance and efficiency.

Nissan Maxima Cat Back ExhaustIf you want a more aggressive exhaust note, look no further than the STILLEN® Stainless Steel Cat Back Exhaust System for Nissan Maxima A36.

Nissan Maxima Cat Back ExhaustBuilt with a purpose in Costa Mesa, CA; this Nissan Maxima Cat Back Exhaust will stimulate your Maxima driving experience. We love style as much as you do, so we finished the Maxima exhaust with dual polished 4 inch angle cut tips. These tips come pre-welded to the mufflers for a precise fit and finish tailored specific to the Maxima platform.

Featured Presentation

FEATURES:

  • Increase of Power and Torque
  • Mild at Idle/Cruising – Aggressive Note Under Throttle
  • Stainless Steel Construction
  • Polished Dual Wall tips
  • Limited Lifetime Warranty

Combine your STILLEN Maxima Cat Back Exhaust with a matched STILLEN HI-Flow Air Intake Kit for an impressive gain in performance and sound.

STILLEN has not stopped at the engine with our Maxima development; STILLEN offers a Front Splitter in Matte Black, a Roof Spoiler in Matte Black or Unpainted and Rear Diffuser in Matte Black or Unpainted

Choose STILLEN and Maximize your Maxima!

If you have any questions about the Nissan Maxima STILLEN Cat Back Exhaust Systems or any STILLEN products for the Nissan Maxima on our website, give us a call at (866) 250-5542, email at sales@stillen.com, or message us on our Live Chat!

Top Exhaust: Magnaflow Exhaust 2017 Honda Civic Type R

Honda created quite a buzz when it’s new Civic Type R FK8 set a class record at the famed Nurburgring Nordschleife racetrack in Germany. They maintained this momentum with the announcement that the Type R trim would be returning to America for the first time since 2001 and for the first time as a Civic Type R. Introducing the Top Exhaust: Magnaflow Exhaust 2017 Honda Civic Type R.

Top Exhaust: Magnaflow Exhaust 2017 Honda Civic Type R HONDA_CIVIC_TYPER

The Type R FK8 comes from the factory with a turbocharged 2.0-liter engine generating 306 horsepower. As with any turbocharged engine, the easier that the turbo can breathe, the more efficiently it will operate and the greater the potential output. Unfortunately, most factory exhaust systems are built conservatively to keep sound levels and cost down. This is also a common bottleneck for performance.

Exhaust manufacturer Magnaflow prides itself for being at the forefront of development, especially when it comes to supporting new vehicle models and platforms. Magnaflow’s latest development is the first cat-back exhaust system to market for the new Civic Type R FK8.

Top Exhaust: Magnaflow Exhaust 2017 Honda Civic Type R 19383

The new Magnaflow Cat-back Exhaust for 2017 Civic Type R [FK8] (19383) is the latest addition to the Competition Series of exhausts. This exhaust features mandrel bent, 2.5-inch 409 stainless steel tubing with V-band clamp connections. A straight through pipe (included with this exhaust system) can be easily swapped with the resonated presilencer for a more aggressive exhaust note. The exhaust terminates into a triple muffler configuration finished with carbon fiber tips. Magnaflow states that this exhaust lends to a more aggressive exhaust note while reducing overall system mass, shedding unwanted, excessive weight. Like all Magnaflow exhausts, the new Civic Type R Cat-back Exhaust features Magnaflow’s limited lifetime warranty.

Magnaflow is first to market with this exhaust for the new Civic Type R FK8… Be among the first on the streets with it! STILLEN is taking preorders on this exciting new exhaust, place your preorder today!


Chat with us (866)250-5542
Email sales@stillen.com
or
Live Chat at www.stillen.com!

Best Exhaust: STILLEN 2016 Infiniti Q50 Cat Back Exhaust

Best Exhaust: STILLEN 2016 Infiniti Q50 Cat Back Exhaust 504450_IMG_07_2016_UP_Infiniti_Q50_carbon_tips

It’s no secret that turbocharged engines thrive when allowed to breathe. Naturally-aspirated engines rely on some back pressure to create a scavenging effect to help maintain exhaust gas velocity. By contrast, turbocharged engines and particularly, the turbocharger(s), function most efficiently when the exhaust offers the least amount of possible resistance.

Best Exhaust: STILLEN 2016 Infiniti Q50 Cat Back Exhaust 504450_IMG_01_2016_UP_Infiniti_Q50_carbon

When Infiniti released the Q50 and Q60 with its new twin-turbocharged VR30DDTT engine, a new chapter in the performance passenger car segment had begun. Drawing on its experience with the VR38 engine that powers the mighty GT-R, the sturdy and underrated VR30 engine relies on its twin Garrett turbochargers to generate boost pressure. When allowed to breathe, the turbochargers really come to life.

Best Exhaust: STILLEN 2016 Infiniti Q50 Cat Back Exhaust IMG_0128

 

STILLEN’s recently developed Short Ram Intake System (402856) (402856DF) has already proven to help produce incremental gains of over 20 horsepower and 33 lb-ft torque to the wheels. Employing years of engineering and manufacturing experience, along with hours of testing on its in-house Dynojet Dynamometer, STILLEN proudly presents its Cat-back Exhaust System for the 2016+ Infiniti Q50 3.0T Silver Sport and Red Sport (p/n 504450, 504451, 504452).

Best Exhaust: STILLEN 2016 Infiniti Q50 Cat Back Exhaust 504450_IMG_02_2016_UP_Infiniti_Q50_carbon

In the quest for the greatest gains possible, STILLEN engineers worked tirelessly to optimize this exhaust system. After several design revisions and numerous prototypes, this Cat-back Exhaust improved output with a best incremental gain of 21.37 horsepower at 4,750RPM and 23.94 lb-ft torque at 4,780RPM.

Best Exhaust: STILLEN 2016 Infiniti Q50 Cat Back Exhaust IMG_0123

The Best Exhaust: STILLEN 2016 Infiniti Q50 Cat Back Exhaust features T-304 stainless-steel construction for corrosion resistance and durability, along with slip fit connectivity for weight reduction. The 3-inch mid-pipe mates to the catalytic converter and splits into two 2.5-inch axle-back mufflers. The mufflers terminate in your choice of three different exhaust tip finishes, including carbon fiber (p/n 504450), stainless steel (p/n 504451) and burnt stainless steel (p/n 504452). The bolt-on exhaust tips enable you to adjust the tip position for a proper fit no matter what bumper or aero you choose to run at the back. You can also purchase the other tips separately in the case that you want to change up the look of your exhaust.

Best Exhaust: STILLEN 2016 Infiniti Q50 Cat Back Exhaust DSC03302

Best Exhaust: STILLEN 2016 Infiniti Q50 Cat Back Exhaust 3R1A9742_2

Best Exhaust: STILLEN 2016 Infiniti Q50 Cat Back Exhaust 3R1A9754

STILLEN proudly engineers and manufactures its products in the USA at its facilities in Southern California.


For more information or to place your order about the Best Exhaust: STILLEN 2016 Infiniti Q50 Cat Back Exhaust
Chat with us 866-250-5542
Email sales@stillen.com
or Live Chat at stillen.com!

2013 G37 Coupe Fitment

STILLEN is pleased to announce new available products and accessories for the 2013 Infiniti G37 Coupe and 2014-15 Infiniti Q60 Coupe.


2013 Infiniti G37 Coupe Exhaust
2013 Infiniti G37 + 14-15 Q60 Coupe Cat-back Exhaust
The true sound of the Infiniti 3.7L engine is released with the STILLEN Infiniti G37 Coupe Cat-Back Exhaust. Made in the USA from 304 Stainless Steel with polished 304SS dual wall exhaust tips, the STILLEN G37 Coupe Cat-Back Exhaust Systems have a dyno proven increase of 19 horsepower. The G37 exhaust sound is aggressive under full throttle, but has a pleasant tone cruising around town. All STILLEN 2013 G37 Coupe Exhausts come with a limited lifetime warranty.


2013 Infiniti G37 Coupe Cold Air Intake

2013 Infiniti G37 Coupe Cold Air Intakes
Dyno-proven increase in horsepower, greater throttle response and an aggressive engine resonance under heavy throttle, no wonder the Cold Air Intake is the most popular upgrade for 2013 G37 Coupe and 2014-15 Q60 Coupe. STILLEN Gen 3 Cold Air Intakes for the Infiniti G37 Coupe & 2014-15 Q60 Coupe are mandrel bent, polished aluminum intake tubes equipped with genuine K&N Air Filters that include a 1,000,000 mile warranty. A STILLEN Gen 2 Cold Air Intake for G37 Coupe is also available and features aluminum tubing fitted to polyurethane filter covers that funnel in cool air from outside the vehicle. The Cold Air Intakes are also 50-state legal and CARB Exempt. Gen 3 Intake shown above.


2013 Infiniti G37 Coupe Supercharger
2013 Infiniti G37 Coupe Superchargers
Take the 328 horsepower G37 Coupe to over 500 crank horsepower (about 380-420whp) with STILLEN’s 2013 Infiniti G37 Coupe Supercharger. These STILLEN supercharger systems are turn-key bolt-on tuned kits that incorporate the Vortech V3 self-lubricating supercharger system and install cleanly under the stock G37 Coupe hood, without any modifications required. The 2013 G37 Coupe supercharger is 50 state street legal with an optional 3 year/36 mile warranty.


2013 Infiniti G37 Coupe Oil Cooler Kit
Infiniti G37 Coupe Oil Cooler Kit
The 2013 Infiniti G37 Coupe’s 3.7 liter engine runs hot in high performance conditions. An oil temperature reduction of 30 to 40 degrees Fahrenheit can be realized with the installation of our specially designed 2013 G37 Coupe Oil Cooler Kits. These Oil Cooler Kits allow hot oil to be circulated and cooled outside of the motor through a high efficiency cooler, creating greater performance and adding thousands of miles of engine life. An absolute must for forced induction or track use.


2013 Infiniti G37 Coupe Sway Bars
2013 Infiniti G37 Coupe Sway Bars
Keep heavy body roll while cornering to a minimum by upgrading to STILLEN’s 2013 Infiniti G37 Sway Bars, and take corners with stability and confidence! STILLEN Sway Bars are made in the USA from high strength aircraft-grade steel and finished with a high quality, corrosion preventing powdercoat. The 2013 G37 Coupe Sway Bars include a 5-Way Adjustable Front Bar (21-48% Stiffer) and 3-Way Adjustable Rear Bar (37-70% Stiffer) that fit everything from track racing to cruising around town, whatever your style of driving may be.


2013 Infiniti G37 Coupe No-Drill License Plate Relocation Bracket
2013 Infiniti G37 Coupe License Plate Relocator Bracket
The STILLEN 2013 Infiniti G37 Coupe License Plate Relocator Bracket mounts the front license plate using the factory tow hook on the front bumper without having to drill into the front fascia. The License Plate Bracket includes all hardware and instructions for the 2013 G37 Coupe for a install that is quick and painless. Save yourself the hassle from potential tickets without ruining your front bumper by drilling in a plate bracket.


Also Available for the 2013 Infiniti G37 Coupe:
2013 Infiniti G37 Coupe STILLEN Sport Rotors
2013 Infiniti G37 Coupe AP Racing Big Brake Kits
2013 Infiniti G37 Coupe Lowering Kits
2013 Infiniti G37 Coupe Coilovers, and more.
STILLEN also carries a full line of auto parts for the entire Infiniti family of cars. Call for more information.

For more information on available auto parts and accessories for the 2013 Infiniti G37 Coupe, call (866) 250-5542 or visit www.STILLEN.com

2013 Infiniti G37 Coupe Fitment

STILLEN is pleased to announce new available products and accessories for the 2013 Infiniti G37 Sedan.



402847DF_KIT_WHI_INFINITI_G37_Q40_4_4

STILLEN Gen 3 Cold Air Intake for the 2009-13 Infiniti G37 Sedan CARB EXEMPT EO# D-436-22

2013 Infiniti G37 Sedan Cold Air Intakes
The most popular upgrade! Solid dyno-proven horsepower increase, improved throttle response and under full throttle an amazing engine note sure to put a smile on your face. Then STILLEN Gen 3 Cold Air Intake for the 2009-13 Infiniti G37 Sedan use long mandrel bent polished aluminum intake tubes fitted with genuine K&N Filters that carry a 1,000,000 mile warranty to deliver a solid 14whp / 6wtq gain on G37 SEDAN models. These Cold Air Intakes are also CARB Exempt EO#D-436-22 and 50-state legal. Gen 3 Intake shown above.


2013 Infiniti G37 Sedan Supercharger
2009-13 Infiniti G37 Sedan Superchargers
Increase your G37 Sedan from 328 horsepower to over 500 crank horsepower (380-420whp) with STILLEN’s 2013 Infiniti G37 Sedan Supercharger. These are turn-key tuned kits that are a bolt-on installation. The STILLEN superchargers incorporate the Vortech V3 self-lubricating supercharger system and install cleanly under the stock G37 Sedan hood, without any modifications required.

The 2013 G37 Sedan STILLEN supercharger is CARB EXEMPT (see EO) and 50 state street legal with an optional 3 year/36 mile warranty.


2013 Infiniti G37 Sedan Sway Bars
2013 Infiniti G37 Sedan Sway Bars
Heavy cars create body roll when cornering, combat that by upgrading to STILLEN’s 2013 Infiniti G37 Sway Bars, and take corners with stability and confidence! STILLEN Sway Bars are constructed from high strength aircraft-grade steel with a high quality powdercoated finish to prevent corrosion. The STILLEN G37 Sedan Sway Bars include a 5-Way Adjustable Front Bar (21-48% Stiffer) and 3-Way Adjustable Rear Bar (37-70% Stiffer) to fit any style of driving, whether on the track or cruising around town.


2013 Infiniti G37 Sedan Cat-back Exhaust
2013 Infiniti G37 Sedan Cat-back Exhaust
Unleash the true sound of the Infiniti 3.7L engine with the STILLEN Infiniti G37 Sedan Cat-Back Exhaust. Constructed from 304 Stainless Steel with polished 304SS dual wall exhaust tips that compliment the car’s dynamic lines and contours brillaintly.

STILLEN Infiniti G37 Sedan Cat-Back Exhaust Systems show a dyno proven 19 horsepower increase (AT THE WHEELS!!) with a pleasing sound while driving around town, but have an aggressive note under full throttle. All STILLEN G37 Sedan Exhausts come with a limited lifetime warranty.


2013 Infiniti G37 Sedan No-Drill License Plate Relocation Bracket
2013 Infiniti G37 Sedan License Plate Relocator Bracket
The STILLEN Infiniti G37 Sedan License Plate Relocator Bracket utilizes the factory tow hook to relocate the front license plate without having to drill into the front fascia. The License Plate Bracket includes all hardware and instructions for the 2013 G37 Sedan for a quick and easy install. Save yourself the hassle from potential tickets without ruining your front bumper by drilling in a plate bracket.


2013 Infiniti G37 Sedan Trunk Wing
2013 Infiniti G37 Sedan Trunk Wing
The STILLEN Infiniti G37 Sedan Trunk Spoiler is designed, tested and built in-house at our facilities in Costa Mesa, California. The Trunk Wing is crafted to keep the functionality of the 2013 G37 Sedan’s rear backup camera while keeping an OEM-like fitment without any drilling to the car to install. All STILLEN G37 body components are constructed from high quality polyurethane, ready for prep and paint (as shown above) and have a limited lifetime warranty against cracking or breaking under normal use.


Also Available for the 2013 Infiniti G37 Sedan:
2013 Infiniti G37 Sedan Oil Coolers
2013 Infiniti G37 Sedan AP Racing Big Brake Kits
2013 Infiniti G37 Sedan Lowering Kits
2013 Infiniti G37 Sedan Coil Overs, and more.
STILLEN also carries a full line of auto parts for the entire Infiniti family of cars. Call for more information.

For more information on available auto parts and accessories for the 2013 Infiniti G37 Sedan, call (866) 250-5542 or visit www.STILLEN.com

With the recent release of the new 2016 Honda Civic, it was only a matter of time before accompanying aftermarket performance parts followed suit. The 1.5-liter turbo variant – the first mass-production Honda offered with a turbo – has arguably garnered the most attention from both car enthusiasts and performance manufacturers alike. Churning out improved, respectable numbers from the factory (174 horsepower at 6000 rpm and a zero to 60 time of 6.8 seconds), the new Civic has many salivating at the possibilities of even greater performance. Injen Technology has been one of the first aftermarket manufacturers to jump onto the scene with parts for 2016 Honda Civic turbo. These offerings include a 3″ stainless steel cat-back exhaust, a cold air intake, and a short ram intake – some of the most common first modifications on a driver’s to-do-list. Below, we’ve broken down these three products and their respective features for you.

 

2016 Honda Civic Turbo Cat-Back Exhaust

Before any aftermarket systems were even conceived, the 2016 Honda Civic 1.5T’s exhaust was already garnering a lot of attention. From the factory, a dual-tipped exhaust system accompanies the rear end of the EX and Touring trim levels – a notable first for any Civic. Injen decided to opt out of the dual exhaust tips in favor of a single-exit exhaust, however, ultimately giving the car a simpler, cleaner look. The 3″ stainless steel cat-back exhaust comes equipped with an embossed muffler and resonators with steel rolled tips. As for the performance output, Injen claims the system will add a respectable 8 HP and 7 lb-ft of torque. The exhaust offers a nice, consistent deep tone, serving as a great accompaniment to the Civic turbo’s newfound performance.

Injen 2016 Honda Civic Turbo cat-back exhaust

This 3” Injen cat-back exhaust system will give your new Civic turbo the powerful sound it deserves.

Part Number

Injen SES1573 3″ Stainless Steel CATBACK Exhaust

 

2016 Honda Civic Turbo Cold Air Intake

A cold air intake is often one of the first modifications performed on any vehicle due to its relatively simplistic and affordable nature. Though cold air intake performance gains vary by vehicle, Injen claims its 2016 Honda Civic cold air intake can boost your car upwards of 29 HP and 25 lb-ft of torque! With significant power gains showing up across the entire rev range, the Injen cold air intake system seems to really open up this turbocharged engine’s potential.

Injen 2016 Honda Civic Turbo Cold Air Intake

You can’t go wrong with an Injen cold air intake – especially one with these numbers!

Part Number

Injen SP1573P Cold Air Intake

2016 Honda Civic Turbo Short Ram Intake

Aside from its cold air intake, Injen also offers a 2016 Honda Civic short ram intake. Featuring Injen’s patented MR (Mega Ram) technology, the company claims it can allow the intake to be tuned within the factory air flow ratio, all while optimizing horsepower and torque gains. Similar to the cold air intake, the 2016 Honda Civic short ram intake boasts some impressive performance increases of up to 23 HP and 21 lb-ft of torque. Depending on your budget, the short ram intake can certainly be a great alternative to its cold air brethren for your turbo Civic.

 

Part Number

Injen SP1572 Short Ram Air Intake

 

Waiting for the Aftermarket Flood Gates to Open

As exciting as the new 2016 Honda Civic turbo appears to be, the possibility of further improving its performance is even more exhilarating. Injen seems to be kicking things off nicely with its offerings of basic bolt-on parts that are sure to be crowd pleasers. However, for our California brothers and sisters, none of these appear to be CARB approved just yet. But have no fear – the aftermarket product wave for this car is only beginning. It is still a Civic, after all – with a factory turbo, at that. For any Honda fan, this is what dreams are made of.

 

If you’re looking for a new Infiniti Q50 and live in the Southern California area, you owe it to yourself to stop by Infiniti of Montclair. They’ve got a white hot Infiniti Q50 that you have to see in person to fully appreciate! It comes stocked with a STILLEN front splitter, STILLEN rear diffuser, STILLEN cat-back exhaust and STILLEN intake.

STILLEN customized Infiniti Q50 with Front Splitter, Cold Air Intakes, Exhaust and Diffuser

STILLEN customized Infiniti Q50 with Front Splitter, Cold Air Intakes, Exhaust and Diffuser

STILLEN Performance Parts Featured on This Infiniti Q50

STILLEN customized Infiniti Q50

STILLEN customized Infiniti Q50

Body Components

Like all of our urethane components, the STILLEN Q50 splitter and STILLEN Q50 rear diffuser are both made durable and resistant urethane. These body components blend so well with the vehicle’s natural look that they look as though they were include in the factory design! They also come with STILLEN’s industry leading manufacturer’s limited lifetime warranty for added peace of mind.

Infiniti Q50 with STILLEN Cat-Back Exhaust & Diffuser

Infiniti Q50 with STILLEN Cat-Back Exhaust & Diffuser

Performance Parts

As you all know, STILLEN is about more than good looks – we’re about performance and that is exactly want you can expect with the cat-back exhaust and cold air intakes. Of course, this Q50’s future owner will get to enjoy that authentic sound that only STILLEN can create- calm under normal driving conditions, but quickly turns aggressive as you accelerate. More importantly though, the owner will get to enjoy that incredibly fun boost of power!

Infiniti of Montclair's Q50 with STILLEN Cold Air Intakes

Infiniti of Montclair’s Q50 with STILLEN Cold Air Intakes

Infiniti of Montclair – Where the Customer is #1

Known for their expert knowledge and stress-free buying experience, Infiniti of Montclair is dedicated to making the customer their top priority. If you want to check out this car in person and experience their superior customer service first hand, be sure to stop by Infiniti of Montclair, which is located at 9440 Autoplex Dr, Montclair, CA 91763. You can also call 909-625-8990 to speak with their expert sales staff, which will be happy to answer any question you have and schedule your test drive.

STILLEN customized Infiniti Q50 with Front Splitter

STILLEN customized Infiniti Q50 with Front Splitter

Got Questions? Call Us!

As always, if you have any questions about the STILLEN product featured on this vehicle or any of the other Infiniti Q50 parts we offer, please feel free to give us a call at (866) 250-5542 and we will be happy to help you.

Break out of the ordinary and take your new 2008-2014 Nissa Altima to the next level with a new STILLEN Stainless Steel Cat-Back exhaust. Just released, these exhaust systems for the Altima are the pride of the STILLEN R&D team. With mandrel bent piping, dual wall tips made of polished stainless steel and a 304 stainless steel construction, it’s easy to see why.

STILLEN 2008 - 2014 Nissan Altima full cat back exhaust

STILLEN’s Nissan Altima Exhaust Systems aren’t just built for looks or sound, but are built for power. Power that you can feel while driving! With this exhaust system, you are sure to enjoy the power band with a big gain on top. Additionally, mileage gains during highway travel can be expected as you cruise at steady speeds.

You’re sure to enjoy this STILLEN exhaust for Nissan Altima for many years. It features aluminized performance mufflers or stainless steel free flowing mufflers for long life. Plus, this system boasts the perfect fit and finish for the Nissan Altima!

STILLEN 2008-2014 Nissan Altima Exhaust

Finally, the improved airflow created by addition of the 2014 Nissan Altima cat-back exhaust is verified by the significant dyno HP increase. If you want to go faster, make your engine more efficient and enjoy a better sounding exhaust, adding the STILLEN Exhaust to your Nissan Altima is a must.

Please note: Actual product may vary slightly from image.

STILLEN Nissan Altima Stainless Steel Cat back exhaust

Features & Benefits of the Nissan Altima Exhaust by STILLEN:

  • Complete Cat-Back Exhaust System
  • Stainless Steel Construction
  • Polished Stainless Tips, End Pipes and Mufflers
  • Increase of Horsepower and Torque
  • Mild at Idle/Cruising – Aggressive Note Under Throttle
  • Limited Lifetime Warranty

STILLEN NISSAN Altima cat back exhaust

Stock Exhaust vs. STILLEN Exhaust – Hear the Difference:

This full cat-back exhaust boasts the sound STILLEN exhausts are known for with an aggressive tone under hard acceleration to add a little bite to your drive. Watch the video below to hear the difference between the Altima stock exhaust and the STILLEN

STILLEN & Nissan – A Long & Lasting Relationship:

The relationship between STILLEN and Nissan has been a long and successful venture. With over 25 years’ experience installing and developing Nissan aftermarket parts, you can trust that the STILLEN team with your Altima. Each exhaust system is meticulously engineered and crafted by our research & development at our facility in Costa Mesa, California and is tested time and time again until we get the perfect sound and performance.

Have Questions? Contact Us!

If you have any questions about this exhaust or any of our other products, please contact us! We will be happy to help you and offer recommendations based on your vehicle and needs. You can reach our Nissan performance part experts at 866-250-5542.

We also carry a variety of stainless steel Altima exhaust systems including Altima cat-back exhaust and Altima axle back exhaust systems.