Tags Posts tagged with "front lip spoiler"

front lip spoiler

With deep roots in the Nissan community, it’s only natural that STILLEN has introduced a new line of power, performance and styling products for the 2016 Nissan Maxima. Our design goal was straightforward: offer enhanced performance and add a hint of aggression to the jet-inspired styling, controls and luxurious appointments of the newly updated Maxima.

2016 Nissan Maxima with Stillen power, performance and body styling parts

STILLEN power, performance and body styling products catapult the 2016 Nissan Maxima into the Jet Set.

The Strong, Silent Type

Reviewers from Car and Driver praised the newly redesigned interior. It’s the rare review that doesn’t wax poetic about the enveloping, technology-rich driver compartment, said to be inspired by a fighter jet cockpit.

Yet the latest Maxima offers reduced cabin noise on par with leading luxury brands. Isn’t this a bit like Top Gun minus the control tower flybys?

Blue Angels

Nissan designers visited the Blue Angels for inspiration and ideas they incorporated into the redesigned 2016 Maxima. Not a bad day in the office!

Still a classic movie and all, but for Maxima pilots looking to enhance the engine note both inside and out, STILLEN offers an axle-back exhaust system to open up the afterburners a notch while offering a bump in horsepower and torque numbers.  Like a navy jet catapulting off a carrier deck, your 0-60 launch will sound a lot sweeter.

Stillen 2016 Nissan Maxima Axle-Back Performance Exhaust System

The STILLEN axle-back performance exhaust turns the 2016 Maxima afterburners up a notch.

Living on the Edge

The heavily restyled Maxima incorporates lots of angles and v-shapes (more fighter jet influence?). You could literally and figuratively describe the ’16 Maxima design as “edgy”. So our designers finished the axle-back exhaust system with 4-inch angle cut, dual wall, tapered exhaust tips. They fill the factory exhaust cutouts nicely, delivering an aggressive look that matches the enhanced exhaust note.

Getting Shredded

Everybody knows you stand clear of jet intakes…unless you want to get shredded the bad way…aka like Parmesan cheese instead of like Ahhhhhhnold.  Turbine engines and car engines both rely on free flowing air to make power (trust us on this, we looked it up on howstuffworks.com).

close up of a navy jet intake

Highway to the Danger Zone!

So the perfect pairing with the axle-back exhaust is a STILLEN cold air intake system. It offers performance gains in the 8-10 horsepower range across the entire powerband. Like the exhaust system, the ram air intake amplifies the engine note just enough to add a sporty edge to the lux interior environment.

Stillen 2016 Nissan Maxima Cold Air Intake

The cold air intake adds firepower to the 2016 Maxima Air Force.

The intake retains the factory intake tract which leads into the STILLEN polyurethane air chamber, ensuring the coldest possible air reaches the engine. A sleek, polished aluminum intake tube adds to the look and durability of the unit. It wouldn’t look out of place on an FA-18 Hornet jet fighter. A genuine K & N high flow air filter ensures the Nissan VQ35 3.5-liter V-6 engine breathes cleanly and freely.

Amping Up the Style

For Maxima owners looking to personalize their ride with some subtly aggressive exterior cues, STILLEN designers hand-crafted some great body styling pieces.

Stillen 2016 Nissan Maxima Rear Diffuser

STILLEN designers took their cues from the Maxima’s ‘Flying V’ taillights to create an edgy, muscular rear diffuser.

The STILLEN Rear Diffuser adds some low-down aggressive styling to the rear end of the Maxima. Our designers realized the stock Maxima backside looked rounded and soft compared to the angular front end. They resolved this split personality disorder with a muscular diffuser that is much more cohesive with overall vehicle styling cues. Once installed, the STILLEN diffuser “wakes” up the angular taillight design and covers up the stock exhaust cans for a more finished look. Engineered and constructed for precise fit, the rear diffuser is available either unfinished and ready for paint or painted matte black.

Stillen 2016 Nissan Maxima Roof Wing Spoiler

The STILLEN roof wing spoiler streamlines the Maxima swept roof line. Supersonic, baby!

For owners looking to enhance the Maxima roof line and improve aerodynamics, STILLEN offers a high quality polyurethane roof wing spoiler. Engineered and constructed for precise fit, the roof wing is available either unfinished and ready for paint or painted matte black.

Stillen 2016 Nissan Maxima front splitter

The STILLEN front splitter will make you shout ‘Great Balls of Fire!”

Nissan’s designers hit their target with the Maxima front end design.  A light touch was all that was needed to add a little jet fuel to the fire – we created a suitably aggressive front lip/splitter that complements the natural lines of the front bumper while adding a subtle edge.

All of the STILLEN brand 2016 Nissan Maxima body styling products are constructed of durable polyurethane using a proprietary formulation. We’re so confident in their durability that we offer a limited lifetime warranty. They’re easy to install, offer precision fit and finish and include genuine 3M auto trim tape and installation instructions.

So if your stock 2016 Maxima doesn’t quite “Take Your Breath Away”, STILLEN, has your six…teen covered.

The 2016 Maxima performance and styling products are proudly Made in the USA by expert craftsmen at the STILLEN hangars in Costa Mesa, California.

STILLEN combines best in class automotive parts and accessories with expert service to deliver personalized lifestyle solutions for automotive enthusiasts seeking power, performance and style.

“Wait, is that a Sentra?” This is the reaction many people have been having when they see the Sansone JR’s Route 66 Nissan‘s STILLEN customized Sentra. As you can see from the photo below, they are saying it with good reason – it has a sleek, aggressive look that is completely different from the stock Nissan Sentra next to it.

STILLEN Custom Nissan Sentra vs. Stock Nissan Sentra

STILLEN Custom Nissan Sentra vs. Stock Nissan Sentra

Remaking the Sansone JR’s Route 66 Nissan Sentra

First, the Sansone JR’s Route 66 Nissan team started by adding the STILLEN Sentra front lip spoiler, STILLEN KB13344 roof spoiler, and STILLEN KB13343rear spoiler. Like all of the urethane body components we manufacturer, these parts are designed and manufactured in the US at our in-house studio and come with a manufacturer’s limited lifetime warranty. You know you’re buying quality when you purchase STILLEN body kits and components!

Sansone JR's Route 66 Nissan Sentra with STILLEN Front Lip

Sansone JR’s Route 66 Nissan Sentra with STILLEN Front Lip

To take their custom look a step further, they lowered the Sentra with RS-R N205D Down lowering springs. While this dropped the car by approximately 1″, you wouldn’t know it based on the ride quality… RS-R is known for providing customers with a nice drop, great performance and a factory-like comfortable ride. This allows you to get the look you want and still enjoy a comfortable ride.

To get a custom sound and a bit more performance, the Sansone JR’s Route 66 team added the STILLEN 504235 rear section exhaust. This exhaust features mandrel bent stainless steel for a long service life and a free flowing performance muffler with polished stainless steel tips. It also offers the signature STILLEN sound that is tame when driven normally, but quickly transforms to an aggressive, authoritative tone when pushed.

Sansone JR's Route 66  Nissan Sentra with STILLEN Exhaust & Body Components

Sansone JR’s Route 66 Nissan Sentra with STILLEN Exhaust & Body Components

Last, but certainly not least, they finished off the project by wrapping the custom Sentra in a Deep Black matte vinyl finish and wrapped the trim in black or painted bronze to match the Klutch SL5 wheels.  Additionally, the portions of the headlights and taillights are wrapped in a sleek, dark tint to complete the aggressive look the Sansone JR’s Route 66 Nissan team was going for.

Where to Find This Custom Nissan Sentra

Known for their relaxed, no hassles attitude and fantastic customer service, the Sansone JR’s Route 66 Nissan Dealership has been working with STILLEN for over four years building exciting vehicles with STILLEN performance parts that customers love.

Sansone JR's Route 66  Nissan Sentra with STILLEN Aftermarket Parts

Sansone JR’s Route 66 Nissan Sentra with STILLEN Aftermarket Parts

To see this custom Sentra, feel free to stop by their poker run, car shows and their “Thirsty Thursday” nights at the Lakewood BlueClaws or stop by their dealership, which is located at 3401 New Jersey 66, Neptune Township, NJ. You can also contact them by calling (732) 922-1050 and they will be happy to answer any questions you have about this vehicle and any of the other vehicles they offer. You can also learn more about how you can customize your car with STILLEN parts that are sold through their accessory store.

Got Questions? Call Us!

As always, if you have any questions about the STILLEN parts available on this vehicle or any of the other Nissan Sentra aftermarket parts we offer, feel free to call our experts at (866) 250-5542 and we will be happy to help you.

The Nissan Altima has some seriously sharp styling from the factory, but for the true enthusiast, STILLEN has developed an all new 2010-12 Nissan Altima Front Lip Spoiler* that will have your Altima the envy of every Nissan owner on the street today.

STILLEN 2010-12 Nissan Altima Front Lip Spoiler

STILLEN 2010-12 Nissan Altima Front Lip Spoiler

The STILLEN Nissan Altima Front Lip Spoiler, made from highly durable and flexible polyurethane – the primary material used in O.E. applications, has been completely designed, tested and manufactured in-house at the STILLEN headquarters located in Costa Mesa, California. STILLEN has been producing body kits in-house for over 20 years, and customers have long enjoyed the benefits of polyurethane over the easily breakable fiberglass parts found on the market today.

Nissan Altima Front Lip Spoiler

The Nissan Altima Front Lip Spoiler* is:

•    Ready to be paint matched and installed on the car.
•    Pre-installed with genuine 3M Foam Trim Tape and hardware.
•    Guaranteed to fit your vehicle perfectly right out of the box.
•    Designed, tested and manufactured in the U.S.
•    Nissan Altima Front Lip Spoiler is backed with a STILLEN Limited Lifetime Warranty.
*For the sedan version only.

Stillen Front Lip Spoiler

To speak with an expert and place your front lip spoiler order, give us a call at (866) 250-5542. You can check out all the STILLEN front lip spoilers we carry, or explore all the items we have for sale here at STILLEN.com. You can also schedule anything from a routine maintenance or install to a full scale racing build on the Performance Shop site.

ANNOUNCING STILLEN’S ALL NEW SCION FR-S / SUBARU BRZ BODY KIT

STILLEN FR-S Body Kit

Continuing STILLEN’s long-standing heritage of producing OEM-quality polyurethane body kits, we’re excited to release the highly anticipated body kit components for the new Scion FR-S and Subaru BRZ.

These OEM-quality body components are the result of a community-sourced design contest publicized on Facebook.

After a two month open entry period, top finalists were picked by STILLEN’s staff from over 100 design entries. The top contestants were then voted on by STILLEN Facebook fans. After a tight race between Greg Thompson and Mohammed Irfendy, Thompson took the win as people’s choice.

The parts were sculpted at STILLEN’s modeling shop in Costa Mesa, CA. Final production pieces are manufactured out of OEM-quality polyurethane in-house at the STILLEN headquarters and manufacturing center. Polyurethane has many benefits for aftermarket automotive applications, the most obvious is it will maintain an OEM-quality finish without cracking, as opposed to composites like fiberglass or carbon fiber.

STILLEN FR-S Body Kit Side

STILLEN FR-S Body Kit shown without Roof or Rear Deck Wing

Components are available separately, as well as packaged together as complete kits. The components include:

POLYURETHANE FRONT LIP SPOILER
This clean yet aggressive lip spoiler has a strong visual effect on the front of the FR-S. Installs over the OEM fascia, and has body lines to ease in painting the piece a 2-tone for additional effect, or can be painted completely body color as well. Front lip spoiler fits FR-S only.

POLYURETHANE SIDE SKIRTS (ROCKERS) WITH REAR CORNER ACCENTS
This 4-piece kit includes both passenger and driver-side side skirts, and also includes rear corners for both sides. Like the lip spoiler, there are body lines present to incorporate a 2-tone paint scheme if desired. Side skirts replace the OEM skirts, and the rear corner accents cover the OEM rear fascia.

STILLEN FR-S Roof Wing

POLYURETHANE ROOF WING
A unique element which rounds out the body kit, seeming to extend the roof line into the rear window. Installs at the top of the rear glass, designed specifically to match the contours of the vehicle.

STILLEN FR-S Rear Deck Wing

POLYURETHANE REAR DECK WING
This simple design element adds a surprisingly large amount of character to the rear trunk. Easily installed and does not require drilling.

FOR MORE INFORMATION, PLEASE VISIT OUR NEW WEBSITE AT WWW.STILLEN.COM

SOCIAL

29,176FansLike
11,711FollowersFollow
5,464FollowersFollow
0SubscribersSubscribe