Tags Posts tagged with "Lip Spoiler"

Lip Spoiler

With deep roots in the Nissan community, it’s only natural that STILLEN has introduced a new line of power, performance and styling products for the 2016 Nissan Maxima. Our design goal was straightforward: offer enhanced performance and add a hint of aggression to the jet-inspired styling, controls and luxurious appointments of the newly updated Maxima.

2016 Nissan Maxima with Stillen power, performance and body styling parts

STILLEN power, performance and body styling products catapult the 2016 Nissan Maxima into the Jet Set.

The Strong, Silent Type

Reviewers from Car and Driver praised the newly redesigned interior. It’s the rare review that doesn’t wax poetic about the enveloping, technology-rich driver compartment, said to be inspired by a fighter jet cockpit.

Yet the latest Maxima offers reduced cabin noise on par with leading luxury brands. Isn’t this a bit like Top Gun minus the control tower flybys?

Blue Angels

Nissan designers visited the Blue Angels for inspiration and ideas they incorporated into the redesigned 2016 Maxima. Not a bad day in the office!

Still a classic movie and all, but for Maxima pilots looking to enhance the engine note both inside and out, STILLEN offers an axle-back exhaust system to open up the afterburners a notch while offering a bump in horsepower and torque numbers.  Like a navy jet catapulting off a carrier deck, your 0-60 launch will sound a lot sweeter.

Stillen 2016 Nissan Maxima Axle-Back Performance Exhaust System

The STILLEN axle-back performance exhaust turns the 2016 Maxima afterburners up a notch.

Living on the Edge

The heavily restyled Maxima incorporates lots of angles and v-shapes (more fighter jet influence?). You could literally and figuratively describe the ’16 Maxima design as “edgy”. So our designers finished the axle-back exhaust system with 4-inch angle cut, dual wall, tapered exhaust tips. They fill the factory exhaust cutouts nicely, delivering an aggressive look that matches the enhanced exhaust note.

Getting Shredded

Everybody knows you stand clear of jet intakes…unless you want to get shredded the bad way…aka like Parmesan cheese instead of like Ahhhhhhnold.  Turbine engines and car engines both rely on free flowing air to make power (trust us on this, we looked it up on howstuffworks.com).

close up of a navy jet intake

Highway to the Danger Zone!

So the perfect pairing with the axle-back exhaust is a STILLEN cold air intake system. It offers performance gains in the 8-10 horsepower range across the entire powerband. Like the exhaust system, the ram air intake amplifies the engine note just enough to add a sporty edge to the lux interior environment.

Stillen 2016 Nissan Maxima Cold Air Intake

The cold air intake adds firepower to the 2016 Maxima Air Force.

The intake retains the factory intake tract which leads into the STILLEN polyurethane air chamber, ensuring the coldest possible air reaches the engine. A sleek, polished aluminum intake tube adds to the look and durability of the unit. It wouldn’t look out of place on an FA-18 Hornet jet fighter. A genuine K & N high flow air filter ensures the Nissan VQ35 3.5-liter V-6 engine breathes cleanly and freely.

Amping Up the Style

For Maxima owners looking to personalize their ride with some subtly aggressive exterior cues, STILLEN designers hand-crafted some great body styling pieces.

Stillen 2016 Nissan Maxima Rear Diffuser

STILLEN designers took their cues from the Maxima’s ‘Flying V’ taillights to create an edgy, muscular rear diffuser.

The STILLEN Rear Diffuser adds some low-down aggressive styling to the rear end of the Maxima. Our designers realized the stock Maxima backside looked rounded and soft compared to the angular front end. They resolved this split personality disorder with a muscular diffuser that is much more cohesive with overall vehicle styling cues. Once installed, the STILLEN diffuser “wakes” up the angular taillight design and covers up the stock exhaust cans for a more finished look. Engineered and constructed for precise fit, the rear diffuser is available either unfinished and ready for paint or painted matte black.

Stillen 2016 Nissan Maxima Roof Wing Spoiler

The STILLEN roof wing spoiler streamlines the Maxima swept roof line. Supersonic, baby!

For owners looking to enhance the Maxima roof line and improve aerodynamics, STILLEN offers a high quality polyurethane roof wing spoiler. Engineered and constructed for precise fit, the roof wing is available either unfinished and ready for paint or painted matte black.

Stillen 2016 Nissan Maxima front splitter

The STILLEN front splitter will make you shout ‘Great Balls of Fire!”

Nissan’s designers hit their target with the Maxima front end design.  A light touch was all that was needed to add a little jet fuel to the fire – we created a suitably aggressive front lip/splitter that complements the natural lines of the front bumper while adding a subtle edge.

All of the STILLEN brand 2016 Nissan Maxima body styling products are constructed of durable polyurethane using a proprietary formulation. We’re so confident in their durability that we offer a limited lifetime warranty. They’re easy to install, offer precision fit and finish and include genuine 3M auto trim tape and installation instructions.

So if your stock 2016 Maxima doesn’t quite “Take Your Breath Away”, STILLEN, has your six…teen covered.

The 2016 Maxima performance and styling products are proudly Made in the USA by expert craftsmen at the STILLEN hangars in Costa Mesa, California.

STILLEN combines best in class automotive parts and accessories with expert service to deliver personalized lifestyle solutions for automotive enthusiasts seeking power, performance and style.

Ford Fusion Front Lip Spoiler


The second-generation Ford Fusion has some aggressive styling from the factory, but for the true enthusiast, STILLEN has developed a Front Lip Spoiler and Roof Wing to take that styling to the next level.

Both the STILLEN Fusion Front Lip Spoiler and Roof Wing are made from durable polyurethane, a flexible material also used in OE applications, and are designed and manufactured here in Costa Mesa, California at the STILLEN compound. STILLEN has been producing body kits in-house for over 20 years, and customers have long enjoyed the benefits of polyurethane over the inferior fiberglass parts others push into the marketplace.

The Ford Fusion Lip Spoiler comes ready to prep and paint, just like any other body part, and comes pre-installed with genuine 3M Automotive Foam Trim Tape and hardware, ready to be paint matched (or anything custom you want to do!) and installed on the car.

Ford Fusion Roof Wing



The Ford Fusion Roof Wing is an item STILLEN has been known for and extreme detail was taken with the Ford Fusion to integrate the roof with with the present 3rd brake light. The Fusion  Roof Wing is also made from polyurethane, and like the Lip Spoiler is easily painted to match the vehicle, or do anything custom you can dream up. Installation is a breeze, as 3M Automotive Foam Trim Tape is pre-applied to the part, ready to adhere to the rear window glass for an easy installation.

All STILLEN polyurethane body components feature a limited lifetime warranty against manufacturing defects, and guaranteed against breakage or cracking in normal use for as long as the customer owns the vehicle.

Give the STILLEN team a call today at (866) 250-5542 for your Ford Fusion body kit components, these are shipping now!

2013-2014 Ford Fusion Front Lip Spoiler – Purchase Here
2013-2014 Ford Fusion Roof Wing – Purchase Here

Additional pictures of the STILLEN Ford Fusion Lip Spoiler and Ford Fusion Roof Wing

During the product development process at STILLEN, our designers and engineers come together to make products that marry form and function to create durable parts that enhance your cars looks and performance. Here’s a sneak peek at how we make body kits and body components for cars like the 2010 Hyundai Genesis Coupe.

With the goal of enhancing the Genesis’ body lines in mind, our design team sketched several variants of a front lip spoiler. After the best concepts were selected, the engineering staff reviewed and revised each mock up, narrowing the ideas down to the most aerodynamically sound and aesthetically pleasing.

Inside STILLEN’s modeling shop, our veteran modelers fashion the first physical version of the 2D mockup to reflect the mock-up penned by the designers. This process is all done on an OEM bumper, which makes for perfect fitment every time.

After taking meticulous measurements and addressing slight changes to contours of the lip spoiler, one side is completed:

…and it can be symmetrically replicated on the opposing side:

Check back soon for more updates on the process of creating a lip spoiler at STILLEN, including the first urethane mold, mounting, and the final product.

SOCIAL

29,176FansLike
11,711FollowersFollow
5,464FollowersFollow
0SubscribersSubscribe