Tags Posts tagged with "splitter"

splitter

STILLEN Dealer Profile: Infiniti Melbourne x STILLEN Q60 Red Sport

Infiniti Melbourne x STILLEN Q60 Red Sport 20170715_145747

The twin-turbocharged Infiniti Q60 Red Sport has been gaining traction with the aftermarket as development progresses on this exciting new luxury coupe. This is evident to us here at STILLEN, as we get feedback from our vast network of partner dealerships. One such dealership, Infiniti of Melbourne in Melbourne, Florida, has seen an increase in the sales of the Q60 as its popularity surges, and reached out to us to collaborate to create this Melbourne x STILLEN Infiniti Q60 Red Sport.

Infiniti Melbourne x STILLEN Q60 Red Sport KB11230_IMG_02_16+_Infiniti_Q60_Front_Splitter

STILLEN Unpainted Front Bumper Splitter for 2017 Infiniti Q60 [V36]

Every enthusiast knows, a car that stands out from the crowd is the car that’s going to capture your attention. When you think about why we modify our vehicles, one of the biggest reasons we do it is to look good. Melbourne Infiniti is well aware of this, and so fitting one of the Q60’s in their showroom with STILLEN Unpainted Front Bumper Splitter for 2017 Infiniti Q60 [V36] was a no-brainer.

Infiniti Melbourne x STILLEN Q60 Red Sport 20170715_145744

Body Styling and Lowering are on the Rise

It’s an unspoken rule among auto enthusiasts that every car looks better with a set of gorgeous wheels and lowered suspension. Therefore, it’s not surprising that with this rise in sales, there is a corresponding increase in aftermarket upgrades purchased. To give this car that oh-so-desirable lowered stance, a set of RS-R Lowering Springs for 2009+ Infiniti Q60 were fitted, offering a 1.2in drop up front and a 1.0in drop at the rear for a sleek yet understated look. A slick set of semigloss black Vossen Wheels completes the aesthetic.

We spoke to Infiniti of Melbourne’s Parts Department manager, Luke Degraff, who shared some of his observations.

“The increased sales of the Q60 coupe, along with its sedan sibling, the Q50, have led to an increase in aftermarket parts sales, especially the STILLEN Unpainted Front Bumper Splitter for 2017 Infiniti Q60 [V36] and the STILLEN Rear Valance Diffuser for 2014-2017 Infiniti Q50 [V36]. A good number of customers have also chosen to lower their new Q50 or Q60 with a set of RS-R Lowering Springs for 2009+ Infiniti Q60 [V36] RWD (N120D). We chose Vossen Wheels to complete the showroom model. The presentation has been very well received!”

Infiniti Melbourne x STILLEN Q60 Red Sport 20170722_220700

The STILLEN equipped Q60 was a hit at Infiniti of Melbourne’s Cars and Coffee event this past Saturday, July 22.

Infiniti of Melbourne also regularly hosts a Cars and Coffee event at the dealership. During their July 2017 event, the STILLEN/RS-R/Vossen equipped Q60 certainly drew plenty of attention from visitors checking out the vehicles on display.

Infiniti Melbourne x STILLEN Q60 Red Sport KB11230_IMG_03_16+_Infiniti_Q60_Front_Splitter

Are you ready to upgrade your Q50 or Q60 V36? If you’re already a customer or live near Infiniti of Melbourne, give Luke Degraff a call at 877-707-1190.

If you have any other questions about STILLEN Products, please feel free to contact us directly at 866-250-5542, by email at sales@stillen.com or via Live Chat at www.stillen.com!

Port City Nissan x STILLEN 2017 Nissan Maxima

Port City Nissan x STILLEN 2017 Nissan Maxima IMG_3297

Nissan has put the “sport” back into its original “four door sports car”, the Nissan Maxima. After unveiling the Sport Sedan Concept early in 2014, it built up anticipation for the eighth generation A36 Maxima for the 2016 model year. Nissan did not disappoint and the numbers prove it, as Maxima sales in March 2017 outperformed the previous 39 months and were the second highest overall in the last 88 months (according to ANDC research).

Port City Nissan x STILLEN 2017 Nissan Maxima IMG_3290

Riding the wave of the Maxima’s popularity, Nate Price, a Parts Consultant at Port City Nissan in Portsmouth, New Hampshire, decided to outfit one of the hot selling sedans with aftermarket components. He installed a STILLEN Front Bumper Lip Splitter Extension for 2016-2017 Nissan Maxima adding this front lip splitter achieving a more aggressive look and some extra performance. Adding to the performance section we will bolt up a STILLEN Stainless Steel Dual Axle-Back Exhaust System for 2016 Nissan Maxima (504399) providing an amazing sound that wakes up the car from factory restrictions on the 8th gen. The chassis was then outfitted with Giovanna 20-inch Haleb wheels before dropping the chassis lower center of gravity, with a set of Eibach Pro-Kit Lowering Springs for 2009-2014 Nissan Maxima (6392.140). According to Price, “We liked the way it turned out, the parts fit like a glove.”
Port City Nissan x STILLEN 2017 Nissan Maxima IMG_3295

Port City Nissan x STILLEN 2017 Nissan Maxima IMG_3294
To outfit your Nissan Maxima A367 with STILLEN products, don’t hesitate to contact the dealerships in the STILLEN Dealer Network. If you’re close to Portsmouth, contact Nate Price at Port City Nissan at 603-431-6500 extension #3.

Port City Nissan x STILLEN 2017 Nissan Maxima IMG_3291


To order or if you have any additional questions about Port City Nissan x STILLEN 2017 Nissan Maxima, please feel free to give us a call:
STILLEN:(800-576-2131)
Email: sales@stillen.com
Chat with us on Live Chat at STILLEN.com.


 

With deep roots in the Nissan community, it’s only natural that STILLEN has introduced a new line of power, performance and styling products for the 2016 Nissan Maxima. Our design goal was straightforward: offer enhanced performance and add a hint of aggression to the jet-inspired styling, controls and luxurious appointments of the newly updated Maxima.

2016 Nissan Maxima with Stillen power, performance and body styling parts

STILLEN power, performance and body styling products catapult the 2016 Nissan Maxima into the Jet Set.

The Strong, Silent Type

Reviewers from Car and Driver praised the newly redesigned interior. It’s the rare review that doesn’t wax poetic about the enveloping, technology-rich driver compartment, said to be inspired by a fighter jet cockpit.

Yet the latest Maxima offers reduced cabin noise on par with leading luxury brands. Isn’t this a bit like Top Gun minus the control tower flybys?

Blue Angels

Nissan designers visited the Blue Angels for inspiration and ideas they incorporated into the redesigned 2016 Maxima. Not a bad day in the office!

Still a classic movie and all, but for Maxima pilots looking to enhance the engine note both inside and out, STILLEN Stainless Steel Axle Back Exhaust System for 2016 Nissan Mazima A367 offers to open up the afterburners a notch while offering a bump in horsepower and torque numbers.  Like a navy jet catapulting off a carrier deck, your 0-60 launch will sound a lot sweeter.

Stillen 2016 Nissan Maxima Axle-Back Performance Exhaust System

The STILLEN axle-back performance exhaust turns the 2016 Maxima afterburners up a notch.

Living on the Edge

The heavily restyled Maxima incorporates lots of angles and v-shapes (more fighter jet influence?). You could literally and figuratively describe the ’16 Maxima design as “edgy”. So our designers finished the axle-back exhaust system with 4-inch angle cut, dual wall, tapered exhaust tips. They fill the factory exhaust cutouts nicely, delivering an aggressive look that matches the enhanced exhaust note.

[youtube https://www.youtube.com/watch?v=LkUuVKJZOlI]

Getting Shredded

Everybody knows you stand clear of jet intakes…unless you want to get shredded the bad way…aka like Parmesan cheese instead of like Ahhhhhhnold.  Turbine engines and car engines both rely on free flowing air to make power (trust us on this, we looked it up on howstuffworks.com).

close up of a navy jet intake

Highway to the Danger Zone!

So the perfect pairing with the axle-back exhaust is a STILLEN Hi Flow Cold Air Intake w/ Dry Filter + Polyurethane Air Duct for 2009-2015 Nissan Maxima A367.

It offers performance gains in the 8-10 horsepower range across the entire powerband. Like the exhaust system, the ram air intake amplifies the engine note just enough to add a sporty edge to the lux interior environment.

Stillen 2016 Nissan Maxima Cold Air Intake

The cold air intake adds firepower to the 2016 Maxima Air Force.

The intake retains the factory intake tract which leads into the STILLEN polyurethane air chamber, ensuring the coldest possible air reaches the engine. A sleek, polished aluminum intake tube adds to the look and durability of the unit. It wouldn’t look out of place on an FA-18 Hornet jet fighter. A genuine K & N high flow air filter ensures the Nissan VQ35 3.5-liter V-6 engine breathes cleanly and freely.

Amping Up the Style

For Maxima owners looking to personalize their ride with some subtly aggressive exterior cues, STILLEN designers hand-crafted some great body styling pieces.

Stillen 2016 Nissan Maxima Rear Diffuser

STILLEN designers took their cues from the Maxima’s ‘Flying V’ taillights to create an edgy, muscular rear diffuser.

The STILLEN Matte Black Rear Valance Diffuser for 2016 Nissan Maxima A367 adds some low-down aggressive styling to the rear end of the Maxima. Our designers realized the stock Maxima backside looked rounded and soft compared to the angular front end. They resolved this split personality disorder with a muscular diffuser that is much more cohesive with overall vehicle styling cues. Once installed, the STILLEN diffuser “wakes” up the angular taillight design and covers up the stock exhaust cans for a more finished look. Engineered and constructed for precise fit, the rear diffuser is available either unfinished and ready for paint or painted matte black.

Stillen 2016 Nissan Maxima Roof Wing Spoiler

The STILLEN Roof Wing Spoiler for 2016 Nissan Maxima A367 streamlines the Maxima swept roof line. Supersonic, baby!

For owners looking to enhance the Maxima roof line and improve aerodynamics, STILLEN offers a high quality polyurethane roof wing spoiler. Engineered and constructed for precise fit, the roof wing is available either unfinished and ready for paint or painted matte black.

Stillen 2016 Nissan Maxima front splitter

The STILLEN Front Bumper Splitter for 2016 Nissan Maxima A367 will make you shout ‘Great Balls of Fire!”

Nissan’s designers hit their target with the Maxima front end design.  A light touch was all that was needed to add a little jet fuel to the fire – we created a suitably aggressive front lip/splitter that complements the natural lines of the front bumper while adding a subtle edge.

All of the STILLEN brand 2016 Nissan Maxima body styling products are constructed of durable polyurethane using a proprietary formulation. We’re so confident in their durability that we offer a limited lifetime warranty. They’re easy to install, offer precision fit and finish and include genuine 3M auto trim tape and installation instructions.

Check out these how to videos for installing your 2016 Nissan Maxima body styling kit

 

So if your stock 2016 Maxima doesn’t quite “Take Your Breath Away”, STILLEN has your six…teen covered.

The 2016 Maxima performance and styling products are proudly Made in the USA by expert craftsmen at the STILLEN hangars in Costa Mesa, California.

STILLEN combines best in class automotive parts and accessories with expert service to deliver personalized lifestyle solutions for automotive enthusiasts seeking power, performance and style.