Tags Posts tagged with "Toyota Tundra"

Toyota Tundra


It is with tremendous pride and excitement that STILLEN announces the launch of the 2014-2020 Toyota Tundra Trupower by STILLEN cold air intake system.  This product release culminates 18 months of product development and testing on this particular air intake.  STILLEN has developed the only true cold air intake available for the third generation Toyota Tundra.

With this particular air intake STILLEN has increased the volume of the air box while also increasing the flow.  The increased flow comes from the radiator shroud inlet system which guides air through the vehicle’s core support and into the larger poly-ethylene airbox.  This design lowers the intake air temperatures back to ambient more than 60 seconds before the factory intake system and far sooner than any other aftermarket intake available.  The Trupower by STILLEN air intake is the best Toyota Tundra intake available today.

Features and Benefits:

  • Achieves ambient air temperatures faster than any other intake on the market
  • Achieves ambient air temperatures 60 seconds faster than factory air intake
  • +20 horsepower increase*
  • +20 torque increase*
  • Easy installation- no cutting/modifications required
  • Serviceable air filter with limited lifetime warranty
  • Made in America
*Result May Vary

TruPower by STILLEN Stage 2 Cold Air Intake

In order to give our customers the best options available STILLEN has developed four different kits:

If you are looking for a full free flowing system without the optional block off plates and would prefer an oiled filter.  Please select kit:

2014-2020 Toyota Tundra Trupower by STILLEN Stage 2 Cold Air Intake Oil Filter – TP403202


If you are looking for a full free flowing system without the optional block off plates and would prefer a dry filter.  Please select kit:

2014-2020 Toyota Tundra Trupower by STILLEN Stage 2 Cold Air Intake Dry Filter – TP403203


If you live in an area that sees extreme weather conditions and would like the peace of mind of a block off plate with an oiled filter.

2014-2020 Toyota Tundra Trupower by STILLEN Stage 2 Cold Air Intake Oil Filter – TP403200


If you live in an area that sees extreme weather conditions and would like the peace of mind of a block off plate with a dry filter.

2014-2020 Toyota Tundra Trupower by STILLEN Stage 2 Cold Air Intake Dry Filter – TP403201


STILLEN® set out to DYNO Challenge 3 different intakes for the 2014-2019 Toyota Tundra 5.7L.

FACTORY INTAKE

 

The first intake to hit the DYNO was the Factory Intake. The factory intake gave us what essentially be the baseline for the Tundra.

HP: 325.78

TQ: 325.96

LEADING COMPETITOR COLD AIR INTAKE

 

The second intake was the Leading Competitor. This intake did better than the Factory Intake.

HP: 335.85

TQ: 366.43

TRUPOWER BY STILLEN COLD AIR INTAKE

 

Finally, the TruPower by STILLEN Cold Air Intake hit the DYNO. This truly cold air intake made more HP and TQ than the factory and leading competitor intakes. 

HP: 340.02

TQ: 367.93


AIR TEMPERATURE

 

But for STILLEN, we wanted prove to how good the TruPower by STILLEN Cold Air Intake truly is. So we tested all 3 intakes in a real world scenario. By far the TruPower by STILLEN Cold Air Intake out performance the Factory and the Leading Competitor intakes.

The TruPower intake proved that it can lower the intake air temperature and improve air flow. The TruPower CAI maintained a good consistent low intake air temperature, making the Toyota Tundra constantly perform as good as it can.

 


Dyno Numbers and Intake Air Temperature


 

If you have any questions about the TruPower by STILLEN Cold Air Intake or any other STILLEN product, give us a call at (866) 250-5542, email sales@stillen.com, or message us on our website Live Chat.

2013 Toyota Tundra with Lowering Kit

A brand new 2013 Toyota Tundra Double Cab came into the shop for a McGaughys Lowering Kit install. This mild 2/4 kit is a 2” drop spindle up front and 4” flip kit in the rear along with McGaughys rear shocks. It is a bolt on kit that is CNC machined, made in the USA and designed to work with the factory suspension components without any major modifications to the truck.

2013 Toyota Tundra Lowering Kit Drop Spindle

2″ Drop Spindle Installed

Rear Angle of Lowered 2013 Toyota Tundra

After lowering any car or truck, it is key to get it aligned to take full advantage of the new suspension and to avoid irregular tire wear. Our 4-wheel computer alignment got the 2013 Tundra back into spec.
2013 Toyota Tundra Getting an Alignment at the STILLEN Performance Shop

2013 toyota tundra lowering kit rear flip kit

Toyota Tundra Rear Ride Height After Flip Kit Installed

2013 Toyota Tundra with Lowering Kit

With just a simple drop this 2013 Toyota Tundra now has a nice lower stance with improved handling. Can’t wait to see what the owner has in store next for this great truck.

Call (866) 250-5537 today for more information on McGaughys products for your truck or SUV. You can also browse our full selection of Toyota Tundra parts by visiting www.stillen.com.

Toyota Tundra Leveling KIt and Exhaust Installed

Toyota Tundra ReadyLift Leveling Kit and Magnaflow Cat-back Exhaust Installed

Here at the STILLEN performance shop, we’ve just finished installing a ReadyLift 3″ Leveling Kit and Magnaflow Cat-back Exhaust System for a customer’s 2013 Toyota Tundra with TRD Package. These two bolt-on mods took this already great looking TRD Tundra and transformed the look and sound while retaining the stock ride and gaining a little more horsepower to the 5.7L V8.


Toyota Tundra Magnaflow Exhaust

2013 Toyota Tundra Magnaflow Cat-back Exhaust System Installed

2013 Toyota Tundra Magnaflow Cat-back Exhaust System
The customer opted for the Magnaflow Off Road Pro Series Cat-back Exhaust that turns down under the bed in front of the rear tire. This Tundra Exhuast is mandrel bent, 2.5″ single tubing with a 3″ turndown tip. The 100% stainless steel Magnaflow Exhaust is dyno tested and has proven performance gains in horsepower and torque, which also carries a lifetime warranty. This great sounding exhaust has a smooth, deep tone and is built to last.

magnaflow exhaust 17111


Toyota Tundra ReadyLift Leveling Kit

Toyota Tundra ReadyLift Leveling Kit Installed

2013 Toyota Tundra ReadyLift 3″ Leveling Kit
The 2013 Toyota Tundra ReadyLift strut extension provides 3.0” of front lift and creates a “prerunner” stance with the front end sitting slightly higher than the rear, which also allows for a larger tire size upgrade if preferred. The ReadyLift 3″ Leveling Kit for the 2013 Toyota Tundra also carries a lifetime warranty.

2013 Toyota Tundra ReadyLift 3" Leveling Kit

Toyota Tundra Leveling KIt and Exhaust Installed

2013 Toyota Tundra Magnaflow Cat-back Exhaust System
2013 Toyota Tundra ReadyLift 3″ Leveling Kit

Hypertech’s expanded the applications for their very popular and customer-rave-reviewed Hypertech Interceptor Tuner. The vastly successful Hypertech Interceptor Tuner has been gaining power, performance and fuel efficiency for Chrysler, Dodge, Jeep and Ram drivers for a few months and now Toyota and Lexus drivers can get the very same tuner. Hypertech’s Interceptor Tuner does almost everything for your vehicle’s performance so once you plug the Hypertech Interceptor Tuner in and set the tuning how you want, you’ll notice a huge difference in the power and response of your vehicle.

With settings for you to have the option of putting in regular, or premium gas at the pump you just set the Hypertech Interceptor Tuner to know which you’re running and it does the rest. Rams with the 5.7L Hemi see 33HP and 40ft/lbs torque gained and whether you’re driving that big working truck, or even cruising luxuriously in a Lexus LX570, you’re going to see an immediate difference in the engine response the first time you touch the accelerator.

Customer tested and proven to grant the ability to get off the line faster, and maintain a regular cruising speed more efficiently, the difference is that once you can resist the urge to floor it at every stop light, you’re even going to have noticeably higher MPG, with gains between 1-2mpg, especially with maintained speed and light acceleration driving.  Hypertech’s Interceptor Tuner is a non-ECU access device and has been developed to provide some of the same benefits and vehicle responses as the more expensive Programmers which are similar, quite a bit more expensive, and not available on the applications the Interceptor is.

Hypertech Interceptor Tuner

Here’s the list to help find the Hypertech Interceptor Tuner that’s right for you:

Hypertech Interceptor Tuner part # 705001 2011-2013 Chrysler 300C 5.7L HEMI / 2011-2013 Dodge Challenger 5.7L HEMI / 2011-2013 Dodge Charger 5.7L HEMI

Hypertech Interceptor Tuner part # 705002 2011-2012 Ram 1500/2500/3500 5.7L HEMI

Hypertech Interceptor Tuner part # 705003 2011-2013 Dodge Durango 5.7L HEMI / 2011-2013 Jeep Grand Cherokee 5.7L HEMI / 2013 Ram 1500/2500/3500 5.7L HEMI

Hypertech Interceptor Tuner part # 705004 2012-2013 Chrysler 300C 6.4L HEMI / 2011-2013 Dodge Challenger 6.4L HEMI / 2012-2013 Dodge Charger 6.4L HEMI

Hypertech Interceptor Tuner part # 705005 2012-2013 Jeep Grand Cherokee 6.4L HEMI

Hypertech Interceptor Tuner part # 705006 2012-2013 Jeep Wrangler 3.6L V6

Hypertech Interceptor Tuner part # 705007 2011-2013 Chrysler 300C 3.6L V6 / 2011-2013 Dodge Challenger 3.6L V6 / 2011-2013 Dodge Charger 3.6L V6 / 2011-2013 Dodge Durango 3.6L V6 / 2011-2014 Jeep Grand Cherokee 3.6L V6

Hypertech Interceptor Tuner part # 706001 2007-2013 Toyota Tundra 5.7L V8 / 2008-2013 Toyota Sequoia 5.7L V8 / 2008-2013 Toyota Land Cruiser 5.7L V8 / 2008-2013 Lexus LX570 5.7L V8

 

Check out all the Hypertech and everything we carry at STILLEN.