Tags Posts tagged with "CARB"

CARB

0

STILLEN VQ35HR 350Z & G35 Supercharger Now Available

STILLEN 07-09 NISSAN 350Z SUPERCHARGED SATIN (4)

STILLEN is proud to announce the availability of the 2007-2008 350Z supercharger kit for the dual throttle body VQ35HR powered Nissan 350Z.

350zsupercharger_0006

This STILLEN supercharger system took over a year to develop and involves revolutionary designs to offer customers easy upgradability and installation.

STILLEN Nissan 350 HR STILLEN SUPERCHARGED (10)

With this supercharger system, power for the 350Z and G35 is boosted to 450 horsepower at the crank (or 360-375whp), and this system won’t give you a hard time when you need to smog, because these kits are CARB Exempt. Thanks to that CARB Exempt EO#, this means when smog – or inspection – rolls around, your car is 100% emissions legal. Since California is the strictest state in the union when it comes to emissions, if it passes CA standards, it probably will pass your local regulations. (Be sure to check your local laws to ensure you’re compliant anyways)

STILLEN_Black_Supercharger_Studio-1

Air to water intercooler: By redesigning the intake manifold we were able to incorporate the intercooler inside the manifold, thus allowing us to cool the air charge immediately before the air enters the engine.

STILLEN_Black_Supercharger_Studio-2

On the dual throttle body VQ35HR engines found in 2008-09 Nissan 350Z and 2008-09 Infiniti G35, power is slightly lower than the VQ37HR, due to the engine being smaller and the fact that VQ37HR has VVEL whereas the VQ35HR does not. Power output is typically around 450 horsepower to the crank (stock is 300hp to the crank), which ends up working out to around 360whp, in most cases.

Supercharged Silver 350Z on Dyno-3

Additionally, the front mounted heat exchanger does not block the airflow supplying cool air to other vital coolers such as the radiator, engine oil cooler, transmission cooler, power steering cooler or the A/C condenser.

STILLEN Nissan 350 HR STILLEN SUPERCHARGED (11)

Because water is 4 times more efficient at dissipating heat than air, we are able to utilize a more compact heat exchanger to cool the water.

Street Legal 350Z Supercharger

** Individual results will vary based on the baseline of the stock engine, type of dynamometer used, temperature, elevation, fuel and various other factors.

STILLEN Nissan 350 HR STILLEN SUPERCHARGED (1)

We put hours of testing and development into ensuring this kit performs as well on the 350Z and G35 as it does on the 370Z.

Supercharged Silver 350Z on Dyno-1

We offer this kit in 2 versions – the Tuner Kit, which does not include the tuner cable, tune file or license and assumes you’ve already got those items – and the Tuned Kit, which includes the tuner cable, a custom tune file and tuning support from STILLEN. Available in your choice of Satin, Polished and Black Powdercoated Finishes for the Supercharger and chargepipes.

Check out Yoshio testing the performance of his newly Supercharged 2008 G35 Sedan in the video below:

Check it out on a Supercharged VQ35HR 350Z in this clip:

Have questions or want to order this kit for yourself? Give us a call at 1-866-250-5542, chat live with the team at STILLEN.com or email us at sales@stillen.com – and of course, you can always stop by the shop during business hours.

0

Best Intake: STILLEN Cold Air Intakes Receive R.B. Exemption

 

Best Intake: STILLEN Cold Air Intakes Receive R.B. Exemption 402856_IMG_01_2016_UP_Infiniti_Q50_3

 

Street-legal status equates to being able to smog and register your car with ease while avoiding fix-it tickets and visits to the courts and/or the state referee. This becomes particularly important if you live in California or any of the 49 other States of America that subscribe to California’s style of stringent emissions requirements. Introducing the Best Intake: STILLEN Cold Air Intakes Receive R.B. Exemption for your vehicle.

Best Intake: STILLEN Cold Air Intakes Receive R.B. Exemption IMG_6976

Developing performance products that achieve street-legal status involve a significant investment of research, development, time and money. To this end, STILLEN prides itself on the engineering time invested to garner measurable performance while maintaining compliance with the standards set forth by the Air Resources Board (A.R.B.). STILLEN employs a Nissan “CONSULT III” diagnostics computer to monitor and log vital data channels to ensure reliable and consistent performance. This means that STILLEN Intake Systems do not require ECU calibration and are a truly “Plug and Play” performance upgrade. No “check engine” lights and no idling issues.

Best Intake: STILLEN Cold Air Intakes Receive R.B. Exemption 402962

Obtaining an Executive Order from the A.R.B. involves prototyping and testing to prove that our STILLEN Intake Systems do not affect the vehicle emissions control devices. Periodically, we resubmit and update our product listings with new products as well as updates to existing part numbers and additional qualifying vehicle applications. Most recently released is the highly anticipated twin turbocharged VR30DDTT, the STILLEN Hi-Flow Intake w/dry filter for 2016-2018 Infiniti Q50 + Q60  (402856DF) and STILLEN Hi-Flow Intake for 2016-2018 Infiniti Q50 + Q60 (402856).

Best Intake: STILLEN Cold Air Intakes Receive R.B. Exemption 402856_IMG_01_2016_UP_Infiniti_Q50_Q60_intake_Overall

STILLEN’s list of qualified products has also expanded its coverage under A.R.B. E.O. # D436-22.

Best Intake: STILLEN Cold Air Intakes Receive R.B. Exemption IMG_6981

Part #                          Application

STILLEN Long Tube Dual Intake w/ dry filter for 2008-2010 Infiniti EX35 (402843DF)

STILLEN Long Tube Dual Intake w/dry filter for 2007-2008 Infiniti G35 Sedan (402843DF)

STILLEN Long Tube Dual Intake w/ dry filter for 2015 Infiniti Q40 (402843DF)

STILLEN Ultra Long Tube Dual Intake w/ dry filter for 2015 Infiniti Q40 (402847DF)

STILLEN Ultra Long Tube Dual Intake for 2009-2013 Infiniti G37 Sedan (402847DF)

STILLEN Z tube w/o intake for 2003-2007 Infiniti G35 Coupe + Sedan (403235)

STILLEN Ultra Long Tube Dual Intake for 2008-2013 Infiniti G37 (402846DF)

STILLEN Ultra Long Tube Dual Intake w/ dry filter for 2014-2015 Infiniti Q60 (402846DF)

STILLEN Ultra Long Tube Dual Intake for 2007-2009 Nissan 350Z (402845DF)

STILLEN Long Tube Dual Intake for 2007-2009 Nissan 350Z (402842DF)

STILLEN Long Tube Dual Intake for 2009-2016 Nissan 370Z (402851DF)

STILLEN Ultra Long Tube Dual Intake for 2009-2016 Nissan 370Z (402852DF)

STILLEN Dual Cold Air Intake w/ dry filter for 2014-2015 Infiniti Q50 (403230DF)

STILLEN Hi-Flow Intake w/ dry filter for 2016-2018 Infiniti Q50 + Q60 (402856DF)

STILLEN Hi-Flow Intake for 1995-97 Nissan Altima (402970AS)

STILLEN Hi-Flow Intake for 2007-2013 Nissan Altima Sedan 3.5L (402841)

STILLEN Hi-Flow Intake for 2013-2014 Nissan Altima 3.5L (402875)

STILLEN Hi-Flow Intake for 2000-2001 Nissan Maxima 3.0L (402956)

STILLEN Hi-Flow Intake w/ Dry Filter + Polurethene Air Duct 2009-2014 Nissan Maxima 3.5L (402962DF)

STILLEN Hi-Flow Intake w/ Dry Filter for 2004-2011 Infiniti QX56 (403447DF)

STILLEN Z-Tube w/o Intake Filter for 2003-2008 Infiniti G35 + FX35 (403235)

STILLEN Hi-Flow Intake w/ Z-Tube for 2003-2008 Infiniti FX35 (402834FX)

STILLEN Hi-Flow Intake for 2003-2008 Infiniti FX35 (402835FX)

STILLEN Hi-Flow Intake w/ Dry Filter for 2004-2015 Nissan Armada +Titan + QX56 (403447DF)

STILLEN Hi-Flow Intake w/ Dry Filter for 2005-2016 Nissan Frontier (403440DF)

 

Contact STILLEN today to get more information or to purchase your new intake today! Give us a call at 866-250-5542, send us an email to sales@stillen.com, or hit us up via Live Chat at stillen.com!

 

0

It’s not every day that we release our Nissan 370Z demo car into the wild but when the guys from The Smoking Tire asked to stop by and take the car for a spin we had to oblige!  Matt Farah has been here before and went for a spin with Steve in the team STILLEN GT-R Targa rally car.  During that visit Matt saw the 370Z in multiple pieces as it was receiving the STILLEN treatment.  After multiple phone calls, emails, and text messages we were able to schedule a visit for Matt to get into the drivers seat of a STILLEN tuned 370Z.

 

Or check out the video at TheSmokingTire.com.

This car has been reworked from the inside out and from front to back.  With KW Variant III coil overs, STILLEN adjustable sway bars, SPC adjustable control arms, AP Racing brakes, Enkei GTC-01 wheels and Toyo R888 tires, STILLEN 370Z Cat-back exhaust, 370Z supercharger (CARB EXEMPT EO# D-436-20 and warrantied) to the STILLEN 370Z Bodykit In Urethane along with the Seibon carbon fiber hood.

All of these upgrades work together brilliantly to create an extremely capable and devastatingly quick Z. The 370Z’s notoriously underwhelming brakes have been replaced with a high performance set from AP Racing. The ride height has been dropped even further using a set of KW V3 Adjustable Coilovers paired with a set of STILLEN Adjustable Sway Bars and Adjustable Control Arms. To help ensure the suspension and brakes can effectively do their job, a set of ENKEI GTC-01 Wheels wrapped in Toyo R888 Tires helps get all 500 ponies to the ground.

Wanna see more? Our friends at /THEDRIVE also gave our 500HP Supercharged 370Z a go. Check that video out here:

For more information on available auto parts and accessories for the Nissan 370Z, call (866) 250-5542 or visit www.STILLEN.com

0

2013 Infiniti G37 Coupe Fitment

STILLEN is pleased to announce new available products and accessories for the 2013 Infiniti G37 Sedan.


402847DF_KIT_WHI_INFINITI_G37_Q40_4_4

STILLEN Gen 3 Cold Air Intake for the 2009-13 Infiniti G37 Sedan CARB EXEMPT EO# D-436-22

2013 Infiniti G37 Sedan Cold Air Intakes
The most popular upgrade! Solid dyno-proven horsepower increase, improved throttle response and under full throttle an amazing engine note sure to put a smile on your face. Then STILLEN Gen 3 Cold Air Intake for the 2009-13 Infiniti G37 Sedan use long mandrel bent polished aluminum intake tubes fitted with genuine K&N Filters that carry a 1,000,000 mile warranty to deliver a solid 14whp / 6wtq gain on G37 SEDAN models. These Cold Air Intakes are also CARB Exempt EO#D-436-22 and 50-state legal. Gen 3 Intake shown above.

2013 Infiniti G37 Sedan Supercharger
2009-13 Infiniti G37 Sedan Superchargers
Increase your G37 Sedan from 328 horsepower to over 500 crank horsepower (380-420whp) with STILLEN’s 2013 Infiniti G37 Sedan Supercharger. These are turn-key tuned kits that are a bolt-on installation. The STILLEN superchargers incorporate the Vortech V3 self-lubricating supercharger system and install cleanly under the stock G37 Sedan hood, without any modifications required.

The 2013 G37 Sedan STILLEN supercharger is CARB EXEMPT (see EO) and 50 state street legal with an optional 3 year/36 mile warranty.

2013 Infiniti G37 Sedan Sway Bars
2013 Infiniti G37 Sedan Sway Bars
Heavy cars create body roll when cornering, combat that by upgrading to STILLEN’s 2013 Infiniti G37 Sway Bars, and take corners with stability and confidence! STILLEN Sway Bars are constructed from high strength aircraft-grade steel with a high quality powdercoated finish to prevent corrosion. The STILLEN G37 Sedan Sway Bars include a 5-Way Adjustable Front Bar (21-48% Stiffer) and 3-Way Adjustable Rear Bar (37-70% Stiffer) to fit any style of driving, whether on the track or cruising around town.

2013 Infiniti G37 Sedan Cat-back Exhaust
2013 Infiniti G37 Sedan Cat-back Exhaust
Unleash the true sound of the Infiniti 3.7L engine with the STILLEN Infiniti G37 Sedan Cat-Back Exhaust. Constructed from 304 Stainless Steel with polished 304SS dual wall exhaust tips that compliment the car’s dynamic lines and contours brillaintly.

STILLEN Infiniti G37 Sedan Cat-Back Exhaust Systems show a dyno proven 19 horsepower increase (AT THE WHEELS!!) with a pleasing sound while driving around town, but have an aggressive note under full throttle. All STILLEN G37 Sedan Exhausts come with a limited lifetime warranty.

2013 Infiniti G37 Sedan No-Drill License Plate Relocation Bracket
2013 Infiniti G37 Sedan License Plate Relocator Bracket
The STILLEN Infiniti G37 Sedan License Plate Relocator Bracket utilizes the factory tow hook to relocate the front license plate without having to drill into the front fascia. The License Plate Bracket includes all hardware and instructions for the 2013 G37 Sedan for a quick and easy install. Save yourself the hassle from potential tickets without ruining your front bumper by drilling in a plate bracket.

2013 Infiniti G37 Sedan Trunk Wing
2013 Infiniti G37 Sedan Trunk Wing
The STILLEN Infiniti G37 Sedan Trunk Spoiler is designed, tested and built in-house at our facilities in Costa Mesa, California. The Trunk Wing is crafted to keep the functionality of the 2013 G37 Sedan’s rear backup camera while keeping an OEM-like fitment without any drilling to the car to install. All STILLEN G37 body components are constructed from high quality polyurethane, ready for prep and paint (as shown above) and have a limited lifetime warranty against cracking or breaking under normal use.

Also Available for the 2013 Infiniti G37 Sedan:
2013 Infiniti G37 Sedan Oil Coolers
2013 Infiniti G37 Sedan AP Racing Big Brake Kits
2013 Infiniti G37 Sedan Lowering Kits
2013 Infiniti G37 Sedan Coil Overs, and more.
STILLEN also carries a full line of auto parts for the entire Infiniti family of cars. Call for more information.

For more information on available auto parts and accessories for the 2013 Infiniti G37 Sedan, call (866) 250-5542 or visit www.STILLEN.com

2

STILLEN is proud to announce that the Infiniti Q50 Supercharger is now available for shipping! Q50 owners across the US and around the world who demand the very best have patiently waited for the STILLEN supercharger to enter production, and the wait was worth it!

STILLEN Infiniti Q50 Black Supercharger

500 Horsepower Supercharger

How does around 500 horsepower at the flywheel sound as a reward for your patience?

Add a dose of torque, better-than-stock heat management and airflow, 50 state emissions compliance and near stock fuel economy at low RPM. Now you’ve got the formula for superchargers done the STILLEN way.

We’re talking driveable horsepower too, suitable for daily drivers, canyon carvers and track days.

What does ‘driveable’ mean? Take an unsuspecting passenger for a low RPM cruise around town in your STILLEN supercharged Infiniti Q50. Keep a light touch on the gas pedal and they might be fooled into thinking there’s a bone stock motor under the hood.

They won’t suspect a thing….until you hit the town limit sign and crack the throttle wide open.

Scenery gets blurry-in-a-hurry as the centrifugal Vortech blower spins up to hyperspeed with a telltale hiss. The STILLEN designed and built intake manifold sucks in cubic yards of cool air. The remapped ECU fuel management module jacks the boosted fuel pump to inject the precise amount of high octane cocktail into the maelstrom.

Your right foot is orchestrating a symphony of controlled violence that delivers a linear, bottomless powerband. If you can peel your head off the headrest to sneak a glance at your passenger you’ll see instant enlightenment and heavy G’s at work.

Some of the exclusive STILLEN Q50 supercharger features include:

  • Boosts output to +/- 500 HP at the flywheel
  • Compact design means no hood replacement required
  • Front-mounted compact heat exchanger maximizes cool air flow to vital engine cooling components
  • In-manifold air-water intercooler chills air charge at engine entry point for maximum efficiency
  • Redesigned intake manifold for increased airflow and torque
  • Utilizes Vortech V3 supercharger – fully sealed, quiet, upgradeable and reliable
  • 50 state legal
  • Available 3 year/36,000 Powertrain Warranty

STILLEN Infiniti Q50 Black Supercharger

STILLEN Quality

Before donning the STILLEN logo, this supercharger was thoroughly tested to ensure maximum quality and performance by our in-house Research and Development team. However, to truly test this supercharger’s limits, it was put through its paces and driven from STILLEN headquarters in Costa Mesa, CA to the SEMA show in Las Vegas, Nevada and back by STILLEN Vice President of Business Development, Kyle Millen.

After the drive, Millen said: “The Q50 drove exceptionally well the whole way. There were a few stretches of road where I was able to open up the car and I was very happy with the power delivery as well as drivability.”

With results like this during testing, we have no question about this supercharger system’s quality and reliability. As such, we are offering a 3 year/36,000 mile manufacturer’s limited engine warranty on this kit.

STILLEN Infiniti Q50 Supercharger

STILLEN Infiniti Q50 Supercharger Kit Part Numbers

Contact Us

We’re sure you have questions about the STILLEN Infiniti Q50 Supercharger,  so please give our experts a call. You can reach them at 866-250-5542 and they will be happy to give you more information, answer any questions you have and help you order your new supercharger!

0

While traveling to Sturgis, STILLEN founder and Racing Champion Steve Millen, had the chance to visit one of our long-time authorized dealers – Garcia Infiniti in Albuquerque, NM. While touring the Garcia Infiniti facility, Steve had the opportunity to learn more about their dealership from Carlos Garcia, owner of Garcia Infiniti, and speak with their service team. Plus, he was able to see firsthand the custom builds they are creating using STILLEN aftermarket parts with their latest showroom Q50!

Steve Millen and the Owner of Garica Infiniti

Steve Millen and Carlos Garcia, Owner of Garcia Infiniti, Standing Next to Garcia Infiniti’s Latest Showroom Q50

Performance Parts Featured On the Garcia Infiniti Q50:

Garcia Infiniti's Showroom Q50 with STILLEN Parts

STILLEN Q50 Premium Front Splitter

  • Durable and Resilient High Quality Urethane Construction so it won’t easily be damaged
  • Racing-Inspired Splitter Design Is Beautiful & Functional – Increases Airflow to Radiator & Heat Exchanger
  • Designed to fit stock “Premium” trim level fascia – Does Not Fit SPORT (Click for SPORT Splitter)
  • Designed and Manufactured at STILLEN HQ in the USA for outstanding quality and fit

Garcia Infiniti's Showroom Q50 with STILLEN Parts

STILLEN Q50 Rear Diffuser

  • Designed and Manufactured in the USA for superior fit and quality
  • Durable and Resilient High Quality Urethane Construction so it won’t easily be damaged
  • Aggressive, Large Diffuser Fins Offer Race-Inspired Look
  • Comes with pre-installed 3M tape and requires no cutting or bumper modifications
  • Manufacturer’s limited lifetime warranty

Garcia Infiniti's Showroom Q50 with STILLEN Parts

STILLEN Cat-Back Exhaust

  • Manufactured in 304 stainless steel and features handsome polished dual wall tips
  • Comes with a manufacturer’s limited lifetime warranty
  • Mandrel bent piping for a smooth flow and performance gains
  • Distinct STILLEN exhaust sound that is mild during cruising, but aggressive when under throttle
  • Designed and Manufactured in the USA at STILLEN HQ For Precision

Garcia Infiniti's Showroom Q50 with STILLEN Parts

STILLEN Cold Air Intake

  • Design features twin mandrel bent polished aluminum intake tubes and polyurethane heat shields
  • Improves Throttle Response and Power
  • Fantastic Sound Under Throttle
  • Heat-Shielded True Cold Air Intake Design
  • Designed and Manufactured in the USA at STILLEN HQ
  • CARB EXEMPT (E.O. #D-436-22)

Steve Millen and the Garcia Infiniti Team

About Garcia Infiniti

Known for their professional demeanor and state of the art facility, the Garcia Infiniti team has been consistently exceeding their customer’s expectations for years.  Their sales team is one of the best; always thoroughly answering potential customer’s questions and working to get them the best price possible for their vehicle.

Additionally, Garcia Infiniti also features a Service Center that not only performs routine maintenance and repairs, but also installs aftermarket performance parts for their customers, which can be purchased on-site from their performance specialists in their Parts Department.  For more information, stop by the Garcia Infiniti dealership, which is located at 1234 S. Renaissance Blvd. NE, Albuquerque, NM 87107 or call (505) 217-3000 to speak with their experts.

Contact Us

If you have any questions about the STILLEN parts featured on the Garcia Infiniti showroom Q50, please contact us! Our experts will be happy to answer your questions and help you select parts to help you get the look, performance and handling you’ve been dreaming of. You can reach us by calling (866) 250-5542.

0

Get the boost of performance you’ve been craving with the all new JBA Ford Mustang Headers! These smooth flowing headers open up your 2011-2014 Mustang’s exhaust for improved performance without compromising the factory emissions equipment.

JBA Cat4ward 2011-2014 Ford Mustang Headers

JBA Cat4ward 2011-2014 Ford Mustang Headers

CARB Exempted Mustang Headers

With the JBA 2011-2014 Ford Mustang 3.7L Cat4ward headers, you can rest easy knowing that they are CARB EXEMPT.

Made for Power

Enjoy maximum power gains with the JBA 2011-2014 Ford Mustang Headers! These headers feature mandrel bent tubing and you can select an optional ceramic coating for added heat protection.

Hassle Free

For your convenience, the JBA Mustang Headers feature a hassle free, bolt-on installation. Plus, they come with 3/8″ CNC laser-cut flanges, which ensure a tight seal for long term, reliable performance without leaks from warping.

3 Finishes to Choose From

Get the perfect look and durability level with three finishes to choose from – Silver, Titanium and Stainless Steel. For more information on these headers, click the links below:

Got Questions About the JBA Ford Mustang Headers? Contact Us!

As a JBA authorized dealer and nearly 30 years’ experience working with aftermarket performance parts, no one is more qualified to answer your questions about the new JBA Ford Mustang headers than the experts at STILLEN. To contact us, simply call (866) 250-5542 and we will be happy to answer any questions you have about these headers or any of the other Ford Mustang parts we offer.

0
Nissan Frontier in the STILLEN Performance Shop

Nissan Frontier in the STILLEN Performance Shop

The summer of superchargers continues at the STILLEN performance shop with the most recent visitor – a Nissan Frontier that just got a STILLEN 407400 supercharger! Like most other STILLEN customers looking to get a supercharger installed, this truck’s owner loved his truck, but just wasn’t satisfied with the power it was making. That’s where the STILLEN experts come in. We hooked his Nissan Frontier up with an imposing supercharger that’s now making plenty of power for him to enjoy while cruising the streets.

STILLEN Nissan Frontier Supercharger Installed

STILLEN Nissan Frontier Supercharger Installed

It’s In the Design

This Nissan Frontier‘s owner chose the STILLEN Nissan Frontier supercharger because this kit optimizes air flow and fuel distribution, resulting in impressive power production. The years of experience working with VQ engines didn’t disappoint… This Nissan Frontier was transformed it into a beast that is full of power.

Utilizing the same twin rotor design as Nissan and other OEMs, this Nissan Frontier supercharger makes BIG peak power and impressive low end and midrange power. Plus, it requires minimal maintenance, ensuring that its owner won’t be spending hours in the garage when he could and should be spending that time on the road enjoying his new supercharger.

2014FrontierSupercharged_0004

The Details – STILLEN Nissan Frontier Supercharger

  • Part Number: STILLEN 407400 black supercharger
  • Fits: 2005-2013 Nissan Frontiers
  • Engines Compatible with : VQ40
  • Available in Polished Finish: Yes
  • 50 State Legal – Including California!! (CARB EXEMPT E.O. #D-436-19)
STILLEN Supercharger Installed in Nissan Frontier

STILLEN Supercharger Installed in Nissan Frontier

Installation

Nissan Frontier in the Performance Shop

Nissan Frontier in the Performance Shop

Professional installation is highly recommended for virtually any supercharger kit for best results, ours included. Be sure to take your Frontier or Xterra to a reputable performance parts installer for your installation.

Not only did our engineers develop the Frontier supercharger kit in-house, but our expert engineers have decades of experience working with Nissan vehicles and know how to get every ounce of power out of it. Chat with our experts, simply give us a call at (866) 250-5542 and we will be happy to help you!

0

This has certainly been the summer of superchargers for the STILLEN performance shop. For as many supercharger installs our ASE certified mechanics have done, none have been better looking than this STILLEN Supercharged Infiniti G37 show car that got a STILLEN polished supercharger for Infiniti G37. From a custom exhaust to carbon fiber body components, this was one very sleek looking car!

STILLEN Supercharger, Seibon Carbon Fiber Body Components & More!

Seibon Carbon Fiber Body Components

The first step in getting this vehicle show ready was getting the Seibon carbon fiber added to its body. From lip to trunk, this Infiniti G37 is decked out in carbon fiber and it looks fantastic! Here’s a full list of the Seibon carbon body components that can be found on this G37:

Seibon Carbon Fiber Specs:

  • Made from grade AA, high-quality carbon fiber
  • Comes with a clear coat and UV coating to protect against fading and discoloration
  • Superior production process yields an impressive carbon/resin ration
  • Hand crafted by expert craftsmen with over 15 years’ experience

STILLEN Polished Supercharger

As supercharger installs go, it’s pretty exciting for the STILLEN performance shop to install a polished blower. Most of our customers are all about the power and less about the looks, so they opt for the satin supercharger. Since this customer chose to go with the show-quality, STILLEN polished supercharger we were pretty excited to see that beautiful sight it would be sitting in the engine bay and this blower didn’t disappoint – it is exquisite.

STILLEN Infiniti G37 Polished Supercharger Specs:

Infiniti G37 Sedan with Seibon Carbon Fiber Fenders, Stance Wheels, and lowering kit

Infiniti G37 Sedan with Seibon Carbon Fiber Fenders, Stance Wheels, and lowering kit

Wheels, Exhaust & Finishing Touches

No show vehicle is complete without wheels and a lowering kit and this show G37 is no different. The owner installed a lowering kit and added Stance Wheels for a sleek, custom look. To make sure the car sounded custom too, the owner also added a custom exhaust. Now that the details are starting to come together, we can’t wait to hear how this vehicle does in the shows it enters. Rumor around the office was that the owner was looking to enter it in the Las Vegas SEMA show… We sure hope to see it there and really hope it wins!

G37 Sedan Getting the STILLEN Supercharger Installed

G37 Sedan Getting the STILLEN Polished Supercharger Installed

Ready to Upgrade? Contact the STILLEN Experts

If you’re ready to get your Infiniti G37 or another vehicle show ready, give us a call at (866) 250-5542 and we will be happy to help you. Our specialists can recommend lowering kits, grilles, exhausts, superchargers, big brake kits, and everything else you need to be show ready. We also feature a performance shop that is open to the public in at headquarters in Costa Mesa, CA.

0

For exceptional performance and classic good looks Nissan customers know you can’t go wrong with the Infiniti Q50S. However, STILLEN customers also know that if you have a vision, you can improve upon any car. In the case of the Infiniti of Kansas City, their vision of what the perfect Infiniti Q50 should be shines through in their latest showroom car. This stunning Q50 features a STILLEN cold air intake, cat-back exhaust, rear spoiler, rear diffuser, front splitter, and roof spoiler. This car is truly special.

Infiniti of Kansas City Q50 with STILLEN Cat-Back Exhaust, Cold Air Intakes, Diffuser, Roof Wing and Trunk Wing, and Roof Wing - Available at Infiniti of Kansas City

Q50 with STILLEN Cat-Back Exhaust, Cold Air Intakes, Diffuser, Front Splitter, Trunk Wing, and Roof Wing – Available at Infiniti of Kansas City

Performance Master

The Infiniti of Kansas City team knows that customized cars are about more than looks – they are about performance. With this in mind they installed a STILLEN cold air intake and STILLEN cat-back exhaust for Infiniti Q50 on this vehicle. Not only will these modifications produce an incredible sound for the future owner to enjoy, but it will also be more fun to drive with an extra kick with a bit more horsepower!

Infiniti of Kansas City Q50 with STILLEN Diffuser, Rear Trunk Wing, Roof WIng and Cat-Back Exhaust

Infiniti of Kansas City Q50 with STILLEN Diffuser, Rear Trunk Wing, Roof Wing and Cat-Back Exhaust

STILLEN Cold Air Intake:

  • Comes with twin mandrel bent polished aluminum intake tubes & polyurethane heat shields
  • No check engine light (CEL) problems or chance of hydro-locking
  • Mild while cruising, but come to life with an impressive intake note under acceleration
  • CARB EXEMPT E.O. #D-436-21

Part Numbers: STILLEN 403230 Infiniti Q50 Generation 2 Dual Cold Air Intake Kit or STILLEN 403230DF Infiniti Q50 Generation 2 Dual Cold Air Intake Kit With Dry Filter

STILLEN Cat-back Exhaust:

  • Made from 304 stainless steel with polished dual wall tips
  • Comes with a manufacturer’s limited lifetime warranty
  • Mandrel bent piping for smooth flow
  • Features the signature STILLEN sound – calm during normal driving, but authoritative under throttle

Part Number: STILLEN 504440 Infiniti Q50 Stainless Steel Cat-Back Exhaust System

Infiniti of Kansas City Q50 with STILLEN Roof Wing and Trunk Wing, and Roof Wing

Infiniti of Kansas City Q50 with STILLEN Roof Wing and Trunk Wing, and Roof Wing

Exceptional Quality

The showroom Q50 at Infiniti of Kansas City is more than just power and performance, it also features several genuine STILLEN body components to enhance the Q50’s Exterior Styling. Like all STILLEN parts, these body components are made at our Costa Mesa, California headquarters by expert craftsmen with the highest quality materials. This ensures each part will fit each vehicle perfectly and it will be extremely durable, allowing our customers to enjoy them for many years.

Q50 Body Components:

  • Vehicle specific application ensures a flush fit
  • Flows with the natural lines of the car
  • Comes with a manufacturer’s limited lifetime warranty

Part Numbers: STILLEN KB11223 Infiniti Q50 Rear Trunk Wing, STILLEN KB11224 Infiniti Q50 Roof Wing, STILLEN Infiniti Q50 Rear Diffuser and STILLEN KB11225 Infiniti Q50 Front Splitter

Infiniti of Kansas City Q50 with STILLEN Front Lip

Infiniti of Kansas City STILLEN Infiniti Q50 Front Lip Installed

Take a Ride at Infiniti of Kansas City

If you’re ready to take the next step and experience Infiniti Q50S STILLEN performance parts yourself, stop by the Infiniti of Kansas City dealership and schedule a test drive. You can reach them by calling (888) 262-1306 or stopping by their dealership, which is located at 6960 W Frontage Rd Merriam, KS 66203. The Infiniti of Kansas City team has a reputation for being knowledgeable and professional, so we’re sure you will be well taken care of.

Contact Us

If you have any questions about the STILLEN performance parts featured on this Infiniti Q50, please feel free to give us a call at (866) 250-5542 and we will be happy to help you. We also feature a full product line for a variety of other vehicles, which you can view on our website at www.stillen.com.

12Next Page 1 of 2
Founded in 1986, STILLEN is recognized as one of the premier tuners in the world. With Engineers and a full R&D department on location, STILLEN has long been engineering brake rotors & pads, developing superchargers with Magnuson, Edelbrock, Whipple, Vortech, and under the leadership of championship race car driver Steve Millen, trusted by thousands of enthusiasts, manufacturing STILLEN branded products and upgrades, as well as wholesale distribution and retail partners.
Contact us: sales@stillen.com
© Steve Millen Sportparts