STILLEN is excited to announce the TruControl by STILLEN Inline Power Module for the 2022-2023 Hyundai Elantra N. The TruControl by STILLEN Inline Power Module is a quick and easy way to add more power to your Elantra N. It makes great power from the factory and the TruControl by STILLEN Inline Power Module is a great way to add even more power for a low cost and simple installation.
We achieve this power by integrating the Power Module into the factory wiring harness and adjusting certain parameters to increase boost pressure and make significant power/torque gains across the entire power band. Installation only takes about 15 minutes and does not require any special tools.
Features and Benefits:
- +55 flywheel Horsepower gain*
- +50 ft. lbs. Torque gain at the wheels*
- Very easy installation; Does not alter the factory ECU
- Bluetooth integration
- No wiring or specialty tools required
- Easy removal
- Not for sale in California
*Results may vary
STILLEN Dyno | The Numbers
From the factory the Hyundai Elantra N is rated at 276 flywheel horsepower. On our dyno we saw a maximum wheel horsepower output of 234 horsepower at 5700 RPM*. This is about a 15% drivetrain loss. After installing our TruControl by STILLEN Inline Power Module the dyno reported back a maximum horsepower output of 279 horsepower at 6,100 RPM*. Making the wheel horsepower greater than the factory flywheel horsepower with an overall gain of more than 55 flywheel horsepower* which equates to a total engine output of 335 flywheel horsepower*.
Even greater gains come from the torque output. Maximum torque from the factory was measured at 243 torque at 2650 RPM*. With the TruControl by STILLEN Inline Power Module installed, our test Elantra N put down 294 ft. lbs of torque at 3200 RPM*. This is an increase of more than 50 ft. lbs of torque at the wheels*.
*Results may vary
TruControl by STILLEN | Easy to Use
With the engine on or with the key on, you can go through and [-/+] select which calibration you want to run at any point in time. You can use the Tuning: Pro App which also controls and resets all calibrations based on what you input in the application.
The TruControl by STILLEN Inline Power Module comes preloaded with up to 7 different maps for your Elantra N. These maps are going to range anywhere from Race mode to Sport mode to Eco mode.
High Performance Spark Plugs
STILLEN recommends upgrading the sparks plugs with HKS High Super Fire Racing M45XL when installing the TruControl By STILLEN.
